Sony LBT-XGR600 Operating Instructions - Page 28
Messages, If the system still does not, operate properly after performing, the above measures
View all Sony LBT-XGR600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
If the system still does not operate properly after performing the above measures, reset the system as follows: 1 Press x on deck B, TUNER ENTER and ?/1 at the same time. 2 Unplug the power cord. 3 Plug the power cord back in. 4 Press ?/1 to turn on the system. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer. Messages One of the following messages may appear or flash in the display during operation. CD CANNOT EDIT The selected disc contains more than 20 tracks or Program Play mode has been set. NO STEP You have cleared all the tracks you programed. OVER You have reached the end of the disc while pressing M during playback or pause. PUSH STOP You have pressed PLAY MODE during playback. STEP FULL You tried to program 26 or more tracks (steps). TAPE NO TAB You cannot record the tape because the tab has been removed from the cassette. NO TAPE There is no tape in the tape deck. Timer OFF TIME NG The Daily Timer or Timer Recording start and end times are set to the same time. 28GB