Sony LBT-ZX80D Instruction Manual - Page 79
Self-diagnosis Function
UPC - 027242709102
View all Sony LBT-ZX80D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Optional components There is no sound. • Refer to General item "There is no sound." (page 74) and check the condition of the system. • Connect the component properly (page 71) while checking: - if the cords are connected properly. - if the cord plugs are firmly inserted all the way. • Turn on the connected component. • Refer to the operating instructions supplied with the connected component and start playing. If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows: Use the buttons on the unit for the operation. 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press ?/1 to turn on the system. 4 Press x, ENTER and ?/1 at the same time. "COLD RESET" appears in the display. The system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock and timer. To return the DVD setup to the default settings*, perform reset as follows: 1 Press DISPLAY when playback is stopped. The Control Menu appears on the TV screen. 2 Press V or v repeatedly to select (SETUP), then press ENTER. 3 Press V or v repeatedly to select "RESET", then press ENTER. 4 Press V or v repeatedly to select "YES", then press ENTER It takes a few seconds to complete. Do not press ?/1 when resetting the system. * Except for Parental Control settings Notes • (FST-ZX100D/LBT-ZX100D/MHC-GN1000D only) Turn off the subwoofer before you reset the system. • (FST-ZX80D/LBT-ZX80D only) If you have connected an optional subwoofer, turn off the subwoofer before you reset the system. Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the system from malfunctioning, a 5-character service number (e.g. C 13 50) with a combination of a letter and 4 digits appears on the TV screen and the front panel display. In this case, check the following table. First 3 Cause and corrective action characters of the service number C 13 This disc is dirty. • Clean the disc with a soft cloth (page 81). C 31 The disc is not inserted correctly. • Restart the system, then re-insert the disc correctly. E XX (XX is a number) To prevent a malfunction, the system has performed the self-diagnosis function. • Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 Troubleshooting continued 79US