Sony LFPK1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 17
Setting Up the LocationFree Player, Adjusting Settings for TV or Videos
View all Sony LFPK1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting Up the LocationFree Player Setting Up the LocationFree Player Adjusting Settings for TV or Videos You can adjust settings such as those for the TV channel or the remote control for connected devices. Setting the TV Channel 1 Select from the control panel (1 page 9), and then press the button. 2 Select [Channel Settings], and then press the button. 3 Select the TV tuner type. After selecting [Power], it may take five seconds or more for the device to respond. If you cannot turn the power on and off, make sure that the make and model are correct, and then try again. Also, check the connection between the Base Station and the connected device, and make sure the IR Blaster is installed properly. 6 Proceed to Step 6. Notes • When using a remote control to watch TV, even if the power turns on and off correctly with [Power], other buttons may not be enabled. If this happens, the remote control settings may be incorrect. Adjust the settings to use the correct remote control. • Some devices may not have a [Power] button (for example, some DVRs do not). In this case, after completing the remote control settings, use the onscreen remote control to confirm that the buttons are enabled. 4 Set for usage of cable TV. Select [Off] or [On], and then press the button. 1 Select [Internal Tuner] or [External Tuner]. If you selected [Internal Tuner], proceed to Step 4. If you select [External Tuner], you may see a message that asks you to save remote control data to Memory Stick Duo™ media. In this case, follow the on-screen instructions to save the data. 2 Select the channel for antenna output from the external tuner. 3 Select the manufacturer of the connected device. 4 Select the type of the connected device. 5 If the configuration above is correct, each time you select [Power], you can turn your device on or off. 5 Using the up and down buttons, select the desired channel, and then press the button. Channels to be skipped by the PSP™ system are set. When done, press the button a final time to complete the setting. Item Channel Skip Description Displays the number of the channel as displayed on the PSP™ system screen. This item cannot be edited. If you select [Yes], the channel will not be displayed on the PSP™ system when changing channels with the PSP™ system's directional buttons or the +/- buttons on the remote control. When you have completed making settings for all channels, press the right button. 17