Sony LSPX-W1 Operating Instructions - Page 10
Unsuitable Conditions, Other Note
View all Sony LSPX-W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Hot and humid • If there is debris, sand, etc. in the legs of the unit, the floor may be damaged. Unsuitable Conditions Do not do any of the following while using the unit. Blocking the ventilation holes (intake or exhaust) On a long fluffy carpet There are the ventilation holes on the bottom of the unit. It may cause a malfunction if the the ventilation holes are blocked. Very dusty and extremely smoky locations Other Note • Air from air conditioners or the ventilation holes of this unit or other devices, may cause oscillation on the projection surface. Be sure not to install this unit in the area where the air from air conditioners or the ventilation holes of these devices reach to the lens part of this unit. • The top cover of the projector opens and closes. If you place something beside the unit, place it at a distance more than 1 mm from the unit. Ventilation holes (exhaust) Ventilation holes (intake) Tilting front/rear and left/right Do not install the unit anywhere other than on a level surface. Installing the unit in such a location may result in uneven color uniformity or reduce the reliability of the effects of the light. If the unit is installed with inclining back and forth, the picture shape on the projection surface is trapezoidal. Install the unit so that the unit and projection surface are arranged in parallel. When installing the unit at high altitudes When using the unit at an altitude of 1,500 m (approx. 4,900 ft) or higher, set "Cooling Setting" on the Setup menu to "High". Failing to set this mode when using the unit at high altitudes could have adverse effects, such as reducing the reliability of certain components. 10 Notes on Installation and Usage