Sony LSPX-WSP Operating Instructions (Speaker) - Page 2
Connecting the Video Projector, Adjusting the foot height, Specifications
View all Sony LSPX-WSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Connecting the Video Projector + terminal (red) - terminal (black) Right speaker (rear side) Video Projector (rear side) Left speaker (rear side) Adjusting the foot height You can adjust the height by using the four feet at the bottom of the speaker. For more details, refer to the operating instructions of the LSPX-W1 Video Projector or the compatible video projector. Side Foot height Fixing nut Adjusting nut Foot Red White Speaker cord (supplied) Speaker cord (supplied) Notes • Set "Speaker" to "On" in Function Menu of the LSPX-W1 Video Projector or the compatible video projector to output the sound from the speakers. • Before connecting the cable, be sure to turn off the Video Projector and disconnect the AC power cord. • Be sure to use the supplied speaker cords. Notes • Use a wrench with a 13 mm nominal diameter double-surface width or the adjustment tool included with the LSPX-W1 Video Projector or the compatible video projector to adjust the feet. • If the foot height is more than 35 mm, the foot may come off and the speaker may slant and result in injury. Specifications Speaker system 2 way speaker system Loud speaker units Woofer: 130 mm (5 1/8 in.), cone type Tweeter: 19 mm (3/4 in.), dome type Enclosure type Bass reflex Rated impedance 8 ohms Maximum input power 40 watts Effective Frequency Range 40 Hz - 20 kHz Dimensions (w/h/d) Approx. 200 mm × 265 mm × 535 mm (7 7/8 in. × 10 1/2 in. × 21 1/8 in.) Mass Approx. 9.7 kg (21 lb. 6.2 oz) Supplied accessories (Refer to "Checking the supplied accessories.") Operating Instructions (this manual, 1) Speaker cords (2) Design and specifications are subject to change without notice.