Sony MDR-1RBT Reference Guide - Page 1

Wireless Stereo Headset Reference Guide US Guía de referencia ES MDR-1RBT ©2012 Sony Corporation Printed in China http://www.sony.net/ English WARNING To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. Excessive sound pressure from headphones can cause hearing loss. CAUTION Risk of Fire and Burns. Do Not Open, Crush, Heat Above 140 °F or Incinerate. Information If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity Trade Name: SONY Model No.: MDR-1RBT Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 USA Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Other trademarks and trade names are those of their respective owners. For the customers in the USA RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Lithium-Ion batteries. Precautions On Bluetooth communication  Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment.  The antenna is built into the unit as illustrated in the dotted line. The sensitivity of the Bluetooth communication will improve by turning the direction of the built-in antenna to the connected Bluetooth device. The communication distance shortens when the obstacles are between the antenna of the connected device and this unit. Location of built-in antenna  The following conditions may affect the sensitivity of Bluetooth communication. - There is an obstacle such as a human body, metal, or wall between this unit and Bluetooth device. - A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit.  Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such a case, perform the following. - Use this unit at least 10 m (about 30 ft) away from the wireless LAN device. - If this unit is used within 10 m (about 30 ft) of a wireless LAN device, turn off the wireless LAN device. - Install this unit and Bluetooth device as near to each other as possible.  Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident: - where inflammable gas is present, in a hospital, train, airplane, or a petrol station - near automatic doors or a fire alarm  This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology.  We do not take any responsibility for the leakage of information during Bluetooth communication.  Connection with all Bluetooth devices cannot be guaranteed. - A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, Inc. and be authenticated. - Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. - While talking on the phone hands free, noise may occur, depending on the device or communication environment.  Depending on the device to be connected, it may require some time to start communication. Others  Do not place this unit in a place exposed to humidity, dust, soot or steam, subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a malfunction.  Using the Bluetooth device may not function on mobile phones, depending on radio wave conditions and location where the equipment is being used.  If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer.  Listening with this unit at high volume may affect your hearing. For traffic safety, do not use this unit while driving or cycling.  Do not put weight or pressure on this unit as it may cause the unit to deform during long storage.  Do not subject the unit to excessive shock.  Clean the unit with a soft dry cloth.  Do not expose the unit to water. The unit is not waterproof. Remember to follow the precautions below. - Be careful not to drop the unit into a sink or other container filled with water. - Do not use the unit in humid locations or bad weather, such as in the rain or snow. - Do not get the unit wet. If you touch the unit with wet hands, or put the unit in a damp article of clothing, the unit may get wet and this may cause a malfunction of the unit.  The earpads may deteriorate due to longterm storage or use.  If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer. Specifications General Communication System Bluetooth Specification version 3.0 Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft)*1 Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS Compatible Bluetooth Profiles*2 A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Hands-free Profile) HSP (Headset Profile) Supported Codec*3 SBC*4 , AAC*5 Supported content protection method SCMS-T Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) Included items Wireless stereo headset (1) micro-USB cable (approx. 50 cm (1.64 ft)) (1) Connecting Cord (approx. 1.5 m (4.92 ft)) (1) Carrying pouch (1) Reference Guide (this sheet) (1) Recommended accessory USB Charging AC Power Adaptor: AC-UD20 (sold separately) *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna's performance, operating system, software application, etc. *2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. *3 Codec: Audio signal compression and conversion format *4 Subband Codec *5 Advanced Audio Coding Wireless Stereo Headset Power source DC 3.6 V: Built-in lithium-ion rechargeable battery Mass Approx. 297 g (10.48 oz) Operating temperature 0 °C to 40 °C (32 °F to 104 °F) Usage hours Communication time (including music playback time): Approx. 30 hours Standby time: Max. 200 hours Charging time Approx. 6 hours Charging temperature 5 °C to 35 °C (41 °F to 95 °F) Receiver Type Closed, Dynamic Driver units 40 mm Frequency response 4 Hz - 80 kHz Microphone Type Electret condenser Direction characteristic Omni directional Effective frequency range 100 Hz - 4,000 Hz System requirements for battery charge using USB Personal Computer with pre-installed with any of the following operating systems and USB port: Operating Systems (when using Windows) ® Windows 7 Home Basic / Home Premium / Professional / Ultimate ® Windows Vista (Service Pack 2 or later) Home Basic / Home Premium / Business / Ultimate ® Windows XP (Service Pack 3 or later) Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005 (when using Macintosh) Mac OS X (version.10.3 or later) Design and specifications are subject to change without notice.