Sony MDR-370LP/GRN Operating Instructions - Page 1
Sony MDR-370LP/GRN - Mdr Core Headphones Manual
UPC - 027242768796
View all Sony MDR-370LP/GRN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
4-152-249-11(1) Stereo Headphones Operating Instructions Manual de instrucciones MDR-370LP ©2009 Sony Corporation Printed in Thailand Tactile dot 1 2 English Stereo headphones Features Small-sized headband. Neodymium magnet delivers powerful sound. Slim and light headband that does not mess up your hairstyle. Pressure-relieving urethane-cushioned earpads for a comfortable fit. Convenient cord adjuster supplied. How to use (see fig. ) These headphones are for use with a stereo mini jack. Wear the headphone marked on your right ear, and the one marked on your left ear. There is a tactile dot on the unit marked to distinguish the left side. How to use the supplied cord adjuster (see fig. ) You can adjust the cord length by winding the cord on the cord adjuster. (The cord can be wound to the cord adjuster up to 30 cm (11 /13 16 in). If you wind more, the cord comes off from the cord adjuster easily.) 1 Wind the cord. 2 Push cord into slot hole to secure in place. Note Do not wind the plug or split section of the cord, as it will strain the cord and may cause a wire break. Specifications Type : Open air, dynamic / Driver unit : 30 mm, dome type (CCAW Voice Coil) / Power handling capacity : 1,000 mW (IEC*) / Impedance : 24 Ω at 1 kHz / Sensitivity : 106 dB/mW / Frequency response : 14 - 22,000 Hz / Cord : 1.2 m (47 1/4 in), Y type / Plug : Gold-plated stereo mini plug / Mass : Approx. 52 g (1.83 oz) without cord / Supplied accessories : Cord adjuster (1), Card warranty (1), Operating Instructions (1) * IEC = International Electrotechnical Commission Design and specifications are subject to change without notice. Precautions Listening with headphones at high volume may affect your hearing. For traffic safety, do not use while driving or cycling. Do not subject the headphones to excessive shock. Handle the driver units carefully. Do not put weight or pressure on the headphones as it may cause the headphones to deform during long storage. The earpads may deteriorate due to long-term storage or use. Do not leave the jack plug dirty otherwise the sound may be distorted. Clean the headphones with a soft dry cloth. Do not blow on the units when cleaning. Do not allow the plug to become dirty, otherwise the sound may deteriorate. The cloth of the earpads has a directional pile. Wipe it so that the cloth does not bristle up. Do not leave the stereo headphones in a location subject to direct sunlight, heat or moisture.