Sony MDR-DS4000 Operating Instructions - Page 7
Rear Panel of the Processor, ATT attenuator switch, LINE IN jacks, DIGITAL IN jack, DC IN 9V jack
UPC - 027242650008
View all Sony MDR-DS4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Rear Panel of the Processor 0dB ATT -8dB L LINE IN R IN DIGITAL OUT DC IN 9V 1 2 3 4 5 1 ATT (attenuator) switch Set this switch to "0dB" if the volume is too low at analogue input. Normally, this switch should be set to "-8dB." 2 LINE IN jacks (see page 14 for details) Connect the audio output jacks on audio or video component (sold separately), such as a video cassette player or TV, to these jacks. 3 DIGITAL IN jack (see page 13 for details) Connect a DVD player, Digital Broadcasting Satellite Receiver, or other digital component (sold separately) to this jack. 4 DIGITAL OUT jack (see page 13 for details) Connected components' digital signal integrity retained when installed. 5 DC IN 9V jack Connect the supplied AC power adaptor to this jack. (Be sure to use the supplied AC power adaptor. Using products with different plug polarity or other characteristics can cause a malfunction.) Preparation 7GB