Sony MDR-RF920RK Operating Manual - Page 8
Connect the supplied AC power, adaptor to the transmitter.
View all Sony MDR-RF920RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
C To connect to TV, etc. If noise occurs when the transmitter is connected to your TV or VCR, set the NOISE FILTER switch to ON. to INPUT B jacks Transmitter 1 CHANNEL 2 3 NOISE FILTER ON OFF INPUT A L INPUT B R DC IN 9V ! Left channel (white) Right channel (red) Connecting cord (supplied) 2 Connect the supplied AC power adaptor to the transmitter. Transmitter to an AC outlet AC power adaptor (supplied) to DC IN 9 V jack Notes • Use only the supplied AC power adaptor. Do not use any other AC power adaptor. to stereo mini jack TV, etc. Notes • If you connect the transmitter to LINE OUT or REC OUT jacks of an audio reproducer such as an MD player or CD player, do not set the NOISE FILTER switch to ON. Otherwise, volume will be limited. • The NOISE FILTER switch is active only in the case of the connection shown in diagram A on page 7 and C. In diagram B, the switch has no effect. • When the transmitter is placed on or near a TV, it may pick up a noise. In such case, place the transmitter away from the TV. Polarity of the plug • If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise. • Do not place the transmitter near a fluorescent lamp, etc. when using the system. 8GB