Sony MDX-F5800 Operating Instructions - Page 26
Error displays/Messages - installation guide
View all Sony MDX-F5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Radio reception Preset tuning is not possible. • Store the correct frequency in the memory. • The broadcast signal is too weak. The stations cannot be received. The sound is hampered by noises. • Connect a power antenna control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna booster. (Only when your car has built-in FM/AM antenna in the rear/side glass.) • Check the connection of the car antenna. • The auto antenna will not go up. t Check the connection of the power antenna control lead. • Check the frequency. • When the DSO mode is on, the sound is sometimes hampered by noises. t Set the DSO mode to "OFF" (page 21). Automatic tuning is not possible. • The local seek mode is set to "ON." t Set the local seek mode to "OFF" (page 14). • The broadcast signal is too weak. t Perform manual tuning. The "STEREO" indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. t Set the monaural reception mode to "ON" (page 15). A program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Cancel monaural reception mode (page 15). Error displays/Messages Error displays (For this unit and optional MD/CD changers) The following indications will flash for about 5 seconds, and an alarm sound will be heard. BLANK*1 No tracks have been recorded on an MD.*2 t Play an MD with recorded tracks on it. ERROR*1 • An MD is dirty or inserted upside down.*2 t Clean or insert the MD correctly. • A MD/CD cannot play because of some problem. t Insert another MD/CD. FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the XM tuner is connected, storing an XM radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. HI TEMP The ambient temperature is more than 50°C (122°F). t Wait until the temperature goes down below 50°C (122°F). NO DISC No disc is inserted in the MD/CD unit. t Insert discs in the MD/CD unit. NO MAG The disc magazine is not inserted in the CD unit. t Insert the magazine in the CD unit. 26