Sony MHC-GX355 MHCGX355 Instructions (model of entire system) - Page 31
Messages, No Disc, No Step, Push Stop, Reading, Step Full, Complete, No Tab, Push Select, Set Clock - troubleshooting
View all Sony MHC-GX355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Messages One of the following messages may appear or flash in the display during operation. CD/MP3 NO DISC There is no disc in the player or you have loaded a disc that cannot be played on this system (such as DVD, VCD, or CD-ROM without MP3 audio tracks, etc.). NO STEP All of the programmed tracks have been erased. OVER You have reached the end of the disc while pressing M during playback or pause. PUSH STOP You pressed PLAY MODE during playback. READING The system is reading information of the disc. Some buttons are not available. STEP FULL You tried to program 26 or more tracks (steps). SET TIMER You tried to select the timer when the Play Timer or Rec Timer are not set. TIME NG The Play Timer or Rec Timer start and end times are set to the same time. Other NOT IN USE You pressed an invalid button. Tuner COMPLETE The preset operation ended normally. Tape NO TAB You cannot record the tape because the tab has been removed from the cassette. NO TAPE There is no tape in the tape deck. Timer PUSH SELECT You tried to set the clock or timer during timer operation. SET CLOCK You tried to select the timer when the clock is not set. Troubleshooting 31GB