Sony MHC-GX40 Operating Instructions - Page 19

Timer-recording radio programs - clock

Page 19 highlights

Tape Timer-recording radio programs You can record a preset radio station from a specified time. To timer-record, you must first preset the radio station (see "Presetting radio stations" on page 13) and set the clock (see "Setting the clock" on page 10). 1 Tune in the preset radio station (see "Listening to the radio" on page 15). 2 Press CLOCK/TIMER SET on the remote. "DAILY SET" appears. 3 Press . or > on the remote repeatedly to select "REC SET", then press ENTER on the remote. "ON" appears and the hour indication flashes in the display. 4 Set the time to start recording. Press . or > on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication starts flashing. Press . or > on the remote repeatedly to set the minute, then press ENTER on the remote. 5 Repeat step 4 to set the time to stop recording. The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., "TUNER FM 5"), then the original display appears. 6 Load a recordable tape into deck B. 7 Press ?/1 to turn off the system. When the recording starts, the volume level is set to minimum. Other Operations To Do this Check the setting Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly to select "REC SELECT", then press ENTER on the remote. Change the setting Start over from step 1. Cancel the timer Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly to select "TIMER OFF", then press ENTER on the remote. Notes • If the system is on at the preset time, the recording will not be made. • When you use the Sleep Timer, Timer-recording and Daily Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate the Daily Timer and Timerrecording at the same time. 19GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Tape
19
GB
Timer-recording radio
programs
You can record a preset radio station from a
specified time.
To timer-record, you must first preset the radio
station (see “Presetting radio stations” on page
13) and set the clock (see “Setting the clock”
on page 10).
1
Tune in the preset radio station (see
“Listening to the radio” on page 15).
2
Press CLOCK/TIMER SET on the
remote.
“DAILY SET” appears.
3
Press
.
or
>
on the remote
repeatedly to select “REC SET”, then
press ENTER on the remote.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press
.
or
>
on the remote
repeatedly to set the hour, then press
ENTER on the remote.
The minute indication starts flashing.
Press
.
or
>
on the remote
repeatedly to set the minute, then press
ENTER on the remote.
5
Repeat step 4 to set the time to stop
recording.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
6
Load a recordable tape into deck B.
7
Press
?/1
to turn off the system.
When the recording starts, the volume level
is set to minimum.
Other Operations
To
Do this
Press CLOCK/TIMER SELECT
on the remote and press
.
or
>
on the remote repeatedly to
select “REC SELECT”, then press
ENTER on the remote.
Start over from step 1.
Check the
setting
Change the
setting
Cancel the timer
Press CLOCK/TIMER SELECT
on the remote and press
.
or
>
on the remote repeatedly to
select “TIMER OFF”, then press
ENTER on the remote.
Notes
If the system is on at the preset time, the recording
will not be made.
When you use the Sleep Timer, Timer-recording
and Daily Timer will not turn on the system until
the Sleep Timer turns it off.
You cannot activate the Daily Timer and Timer-
recording at the same time.