Sony MHC-M100 Operating Instructions (primary manual) - Page 44
Optional Components, Connecting audio components
View all Sony MHC-M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Optional Components Connecting audio components To enhance your system, you can connect optional components. Refer to the instructions of each component. Connecting an MD deck Select one of the following two connections, depending on the equipment to be connected and method of recording. Connecting an MD deck for digital recording You can record from CD into the MD deck digitally by connecting an optical cable. To the DIGITAL IN jack of the MD deck Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until "MD" appears. To the audio output of the MD deck Note If you cannot select "MD" even when you have pressed FUNCTION, press ?/1 while holding down FUNCTION when the power is turned off. "VIDEO" will be switched to "MD." To return to "VIDEO," do the same procedure. Tip (MHC-M500AV/M300AV only) When you connect a Sony MD deck, you can use the MD H, X, and x buttons on this system's remote to perform play, pause, and stop operations. 44