Sony MHC-RG70AV Operating Instructions - Page 8

Hooking up the system continued, To enjoy Dolby Pro Logic Surround sound

Page 8 highlights

Hooking up the system (continued) Positioning the speakers 1 Place the front speakers at an angle of 45 degrees from your listening position. Center surround speaker Front speaker (R) Front speaker (L) 3 Place the rear surround speakers facing each other at about 60 to 90 cm above your listening position. 60 to 90 cm Rear surround speaker 45º Rear surround speaker (R) Rear surround speaker (L) 2 Place the center surround speaker at about the same height as the front speakers. Align the center surround speaker with the front speakers or place it slightly behind the front speakers. Adjusting the speaker volume To enjoy Dolby Pro Logic Surround sound, turn on the Dolby Pro Logic mode, then adjust the volume of each speaker using the test tone provided by the system. 1 Press PRO LOGIC (or PRO LOGIC ON/ OFF on the remote). "PRO LOGIC ON" appears. 2 Press TEST TONE on the remote. Each speaker emits the test tone cyclically in the following order. LEFT (front) t CENTER t RIGHT (front) t REAR R (right) t REAR L (left) 3 From your listening position, press REAR/CENTER LEVEL on the remote to adjust the volume of the rear surround speakers. 4 Press v or V repeatedly to select the volume level. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8
Positioning the speakers
1
Place the front speakers at an angle of
45 degrees from your listening
position.
3
Place the rear surround speakers
facing each other at about 60 to 90 cm
above your listening position.
Hooking up the system (continued)
Center surround speaker
Front
speaker
(L)
Front
speaker
(R)
Rear
surround
speaker
(L)
Rear
surround
speaker
(R)
Rear
surround
speaker
60 to 90 cm
Adjusting the speaker volume
To enjoy Dolby Pro Logic Surround sound,
turn on the Dolby Pro Logic mode, then adjust
the volume of each speaker using the test tone
provided by the system.
1
Press PRO LOGIC (or PRO LOGIC ON/
OFF on the remote).
“PRO LOGIC ON” appears.
2
Press TEST TONE on the remote.
Each speaker emits the test tone cyclically
in the following order.
LEFT (front)
t
CENTER
t
RIGHT (front)
t
REAR R (right)
t
REAR L (left)
3
From your listening position, press
REAR/CENTER LEVEL on the remote to
adjust the volume of the rear surround
speakers.
4
Press
v
or
V
repeatedly to select the
volume level.
45º
2
Place the center surround speaker at
about the same height as the front
speakers. Align the center surround
speaker with the front speakers or
place it slightly behind the front
speakers.