Sony MHS-PM5K/P bloggie™ Handbook - Page 16
Preparing the battery pack
UPC - 027242789074
View all Sony MHS-PM5K/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1 Preparing the battery pack Power/Charge lamp USB connection support cable (supplied) USB jack slide lever USB jack cover AC Adaptor Power cord (Mains lead) 1 Open the battery/memory card cover and insert the battery pack into this camera, then close the cover. • Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks. • You cannot open the battery/memory card cover when a tripod is attached to the camera. 2 Open the USB jack cover, then slide the USB jack slide lever. 3 Connect the camera to the computer that is turned on with the USB connection support cable (supplied). • The Power/Charge lamp lights up in orange, and charging starts. • When the Power/Charge lamp turns off, charging is finished. • The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10 to 30°C.) 4 When charging is finished, disconnect the USB connection support cable from the USB jack of your camera. b Notes • While the camera is connected to a computer, you cannot operate the camera. Be sure to disconnect the camera before operation. • Charging the battery with customized or hand-built computers is not guaranteed. Depending on the type of USB device used, charging may not function properly. 16