Sony MRW620-U1 Operating Instructions - Page 1
Sony MRW620-U1 Manual
View all Sony MRW620-U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
3-295-886-13 (1) Internal Multi-Card Reader/Writer Operating Instructions Before operating the unit, please read this document thoroughly, and retain it for future reference. This product and manual are intended for persons who have expert knowledge of personal computers (PCs). Read your PC and motherboard manuals carefully before connecting the product to your PC. If you have any questions, contact your Sony representative. MRW620-U1 © 2008 Sony Corporation Printed in China Owner's Record The model and serial numbers are located on the bottom of the reader/writer. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony representative regarding this product. Model No. MRW620-U1 Serial No. WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Caution This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note If you have any questions about this product, you may call the telephone number listed in "Technical Support." The telephone number below is not for customer service but only for official purposes. Declaration of Conformity Trade Name: SONY Model No.: MRW620 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE TO USERS All rights reserved. This manual described herein, in whole or in part, may not be reproduced or translated to any machinereadable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE DEVICE DRIVERS OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. SONY CORPORATION IS NOT RESPONSIBLE FOR ANY DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR OTHER INFORMATION STORED ON ANY MEDIA. Copyright law prohibits unauthorized use of any recorded audio/video for any other purpose than personal enjoyment. Please be warned that the "Memory Stick" containing images and data protected by copyright shall be strictly used within copyright law. Trademarks • , "Memory Stick," "Memory Stick Duo," "MagicGate Memory Stick," "Memory Stick PRO," "Memory Stick PRO Duo," "Memory Stick PRO-HG Duo," "Memory Stick Micro," and "M2" are registered trademarks or trademarks of Sony. • Microsoft®, Windows®, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States of America and/or other countries. • Other system names, product names, and company names appearing in this manual are trademarks or registered trademarks of their respective holders, even though not indicated by the ® or ™ marks. About this Document This document is intended for customers who specialize in the assembly of build-to-order and other PCs. End users should observe the following items when using this product and manual. • Read your PC and motherboard manuals thoroughly. • When connecting this Reader/Writer's USB cable to your motherboard, first read the motherboard manual to learn the position and pin assignment of the USB header. Inserting the USB cable of this Reader/Writer into other terminals, into a USB header with a different pin assignment on the motherboard, or inserting it incorrectly may cause serious damage not only to the Reader/Writer but also to the PC and other connected devices. Overview The MRW620-U1 (hereafter referred to as the "reader/writer") has the following features: s Quick and simple data transfer - easily transfer images from camera to PC s Compatible with "Memory Stick," "Memory Stick PRO," "Memory Stick Duo," CompactFlash, Microdrive, xD-Picture Card, SmartMedia, MultiMediaCard, SD Memory Card s Changeable front panel: Customize your own PC s Quick and easy installation System Requirements The reader/writer requires the following minimum system configuration: • OS - Windows® 7 - Windows Vista® - Windows® XP Home or Professional - Windows® 2000 Professional (Service Pack 4 or later) - Windows® Me • Motherboard Interface - USB header Package Contents When you unpack the box, make sure that it contains all the accessories listed below. If anything is missing or damaged, contact your retailer. • MRW620-U1 Internal Multi-Card Reader/Writer • Front Panel (lvory) • Operating Instructions • Mount Screw (M 3 x 5) x 4 • Warranty Card Parts and Functions Front 1 5 2 3 4 6 1 Access Indicator The indicator blinks when the reader/writer accesses data on a memory card. 2 SmartMedia / xD-Picture Card Slot Insert either a SmartMedia memory card or xD-Picture Card here. 3 USB Port Insert a USB device here. 4 CompactFlash / Microdrive Slot Insert either a CompactFlash or Microdrive memory card here. Remove all other memory cards before using a Microdrive, because of its large power consumption. 5 MultiMediaCard / SD Memory Card Slot Insert either a MultiMediaCard or an SD Memory Card here. When inserting a miniSD Card, use an adaptor (not supplied). 6 "Memory Stick" Slot Insert a "Memory Stick" media here. When inserting a "Memory Stick Duo" (without MagicGate), "MagicGate Memory Stick Duo," "Memory Stick Duo" (with MagicGate), "Memory Stick PRO Duo," "Memory Stick PROHG Duo," or "Memory Stick Micro" ("M2"), use an adaptor (not supplied). Rear 7 USB Cable: Black (for USB devices) 8 USB Cable: Beige (for memory cards) 7 USB Cable (Black) Connected to the USB header on your motherboard. For the detail, see "Installing the Reader/Writer." 8 USB Cable (Beige) Connected to the USB header on your motherboard. For the detail, see "Installing the Reader/Writer." Pin Assignments Signal VCC -DATA +DATA Ground Shield (Non Connection) PIN No. 2 1 4 3 6 5 8 7 10 2 1 4 3 6 5 8 7 10 Connector Replacing the Front Panel Front panel in alternate colors (ivory) is included for use with different computer case color. If you want, replace the standard black front panel with one of the replacements, as follows. 1 Hold the reader/writer face front and gently remove the panel. How to release Front Panel hook from the hooking hole Insert sharp object such as tweezer into the gap and push gently on the hook to release the front panel CAUTION Apply too much force may break front panel hook. a) Push front panel first hook gently to release it from the hole. First hook is off from the hole. b) Push front panel second hook gently to release it from the hole. 2 1 4 3 6 5 8 7 10 Connector 12 34 56 78 0 USB Header 6 Reinstall the cover on your computer. 7 Plug your computer to the AC power outlet. 8 Start your computer. The reader/writer is automatically detected. You do not need to install any device drivers. Notes • On some computers, a message may appear asking you to insert the operating system disc. When this happens, follow the computer's instructions. • On some computers, the "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message may appear, indicating that a hi-speed USB device has been connected to a USB port which does not support hi-speed USB. If your computer has multiple USB headers, try connecting to a different header. Otherwise, close the message and continue using the reader/ writer with the current header. Second hook is off from the hole. c) Pull out the right side of the front panel as illustrated, then remove the panel. Then remove Front Panel (Remove slowly in this direction with light force) 2 Install the new front panel (left side first, as illustrated), and then push the right side until you hear a click. Installing the Reader/Writer CAUTION • Read your PC and motherboard manuals thoroughly. • Before installing the reader/writer in your computer, be sure to turn off the power and remove the AC power cord from the outlet. (Recent computers remain internally live even after Windows is shut down.) WARNING When connecting the reader/writer's USB cable to your motherboard, first read the motherboard manual to learn the position and pin assignment of USB header. Installing the USB cable to this reader/ writer into other terminals such as IEEE1394 header, into a USB header with a different pin assignment on the motherboard, or inserting it incorrectly may cause serious damage not only to the reader/writer but also to the computer and other connected devices, in the worst case it makes fire or smoke. To Install the Reader/Writer 1 Unplug your computer from the AC power outlet. 2 Follow your computer and motherboard manual to prepare a drive bay for this reader/writer. 3 Insert the reader/writer into the drive bay of your computer. 4 Secure the reader/writer with four screws. 5 Connect the USB cable to the USB header on the motherboard. Make sure it is connected in the correct directions. Specifications USB transfer rate Full-speed (12 Mbps) Hi-speed (480 Mbps) This hi-speed transfer rate is theoretical value for the USB standard. Actual performance is dependent on the device. Power requirements 4.75 V to 5.25 V DC Current consumption Max. 500 mA *1 Access indicator Blinks on access Operating environment Temperature: 5 °C to 40 °C (41 °F to 104 °F) Humidity: 30% to 80% RH Storage environment Temperature: -30 °C to + 60 °C (-22 °F to +140 °F) Humidity: No condensation Mass Approx. 200 g (7.1 oz.) *1 Except when using Microdrive Dimensions 125.6 (Units : mm) 101.6 5 25.4 Fornt panel USB Cable: Black (for USB devices) 3-M3 22.5 60 90 USB Cable: Beige (for memory cards) 94 No tapping (4 portions) USB Cable Connector 32.5 70