Sony MZ-N420D Operating Instructions - Page 53

Using a MD Walkman connected to the computer, Install the SonicStage/MD Simple Burner software - driver

Page 53 highlights

Using a MD Walkman connected to the computer Problem Cause/Remedy Your computer does not recognize the MD Walkman. The MD Walkman is not firmly connected with the supplied dedicated USB cable to the computer. tReconnect the MD Walkman to the computer firmly. A disc is not inserted in the MD Walkman. tCheck if a disc is inserted in the MD Walkman. The Net MD driver is not be installed. tInstall the SonicStage/MD Simple Burner software using the supplied CD-ROM. Even though the dedicated USB cable is used to connect the MD Walkman to the computer, the display on the MD Walkman does not indicate it is connected. It takes time to recognize SonicStage. Please wait. The other application software is running. tReconnect the supplied dedicated USB cable after a while. If the computer still does not recognize the MD Walkman, disconnect the MD Walkman, restart the computer, and connect the dedicated USB cable again. The progress bar on the display is not moving. The access lamp has not lit for a few minutes. The supplied dedicated USB cable is disconnected. tConnect the supplied dedicated USB cable firmly. The connections are made through a USB hub. tOperations are not guaranteed for USB-hub connections. Connect the MD Walkman directly to the USB connector on the computer. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

53
Using a MD Walkman connected to the computer
Problem
Cause/Remedy
Your computer does not
recognize the MD Walkman.
The MD Walkman is not firmly connected with the
supplied dedicated USB cable to the computer.
t
Reconnect the MD Walkman to the computer firmly.
A disc is not inserted in the MD Walkman.
t
Check if a disc is inserted in the MD Walkman.
The Net MD driver is not be installed.
t
Install the SonicStage/MD Simple Burner software
using the supplied CD-ROM.
Even though the dedicated
USB cable is used to connect
the MD Walkman to the
computer, the display on the
MD Walkman does not indicate
it is connected.
It takes time to recognize SonicStage. Please wait.
The other application software is running.
t
Reconnect the supplied dedicated USB cable after a
while. If the computer still does not recognize the
MD Walkman, disconnect the MD Walkman, restart
the computer, and connect the dedicated USB cable
again.
The progress bar on the display
is not moving. The access lamp
has not lit for a few minutes.
The supplied dedicated USB cable is disconnected.
t
Connect the supplied dedicated USB cable firmly.
The connections are made through a USB hub.
t
Operations are not guaranteed for USB-hub
connections. Connect the MD Walkman directly to
the USB connector on the computer.