Sony MZ-N420DPS Operating Instructions - Page 53
Using a MD Walkman connected to the computer, Install the SonicStage/MD Simple Burner software
View all Sony MZ-N420DPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using a MD Walkman connected to the computer Problem Cause/Remedy Your computer does not recognize the MD Walkman. The MD Walkman is not firmly connected with the supplied dedicated USB cable to the computer. tReconnect the MD Walkman to the computer firmly. A disc is not inserted in the MD Walkman. tCheck if a disc is inserted in the MD Walkman. The Net MD driver is not be installed. tInstall the SonicStage/MD Simple Burner software using the supplied CD-ROM. Even though the dedicated USB cable is used to connect the MD Walkman to the computer, the display on the MD Walkman does not indicate it is connected. It takes time to recognize SonicStage. Please wait. The other application software is running. tReconnect the supplied dedicated USB cable after a while. If the computer still does not recognize the MD Walkman, disconnect the MD Walkman, restart the computer, and connect the dedicated USB cable again. The progress bar on the display is not moving. The access lamp has not lit for a few minutes. The supplied dedicated USB cable is disconnected. tConnect the supplied dedicated USB cable firmly. The connections are made through a USB hub. tOperations are not guaranteed for USB-hub connections. Connect the MD Walkman directly to the USB connector on the computer. 53