Sony MZ-R70 Operating Instructions - Page 60
Troubleshooting, Symptom, Cause/Solution
View all Sony MZ-R70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Troubleshooting Should any problem persist after you have made these checks, consult your nearest Sony dealer. Symptom Cause/Solution The recorder does not work or works poorly. • Audio sources may not be securely connected. , Disconnect the audio sources once and connect them again (pages 8, 18). • The HOLD function is turned on ("HOLD" appears in the display when you press an operation button on the recorder). , Disable HOLD by sliding the HOLD switch in the opposite direction of the arrow (page 37). • Moisture has condensed inside the recorder. , Take the MD out and leave the recorder in a warm place with the lid open for several hours until the moisture evaporates. • The rechargeable battery or dry battery is weak (r or "LOW BATT" flashes). , Charge the rechargeable battery or replace the dry battery (page 53). • The rechargeable battery or dry battery have been inserted incorrectly. , Insert the battery correctly (page 55). • You pressed a button while the disc indication was rotating quickly. , Wait until the indication rotates slowly. • When recording digitally from a portable CD player, you did not use AC power or did not disable the anti-skip function such as ESP (pages 10, 11). • The analog recording was made using a connecting cord with an attenuator. , Use a connecting cord without an attenuator (page 18). 60