Sony MZ-R700DPC Operating Instructions - Page 61
Hi Dc In, Low Batt, Mem Over, No Copy, No Disc, No Signal, P/b Only, Protected, Insert An Md.
View all Sony MZ-R700DPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Hi DC in • Voltage of the power supply is too high (The supplied AC power adaptor is not used). - Use the supplied AC power adaptor. HOLD • The recorder is locked. - Move HOLD against the arrow to unlock the recorder (pages 12, 38). LOW BATT • Battery is weak. - Charge the rechargeable battery or replace the dry battery (page 11). MEM OVER • You tried to record with the recorder placed where it receives continuous vibration. - Put the recorder on a stable place, and start recording again. NO COPY • You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. - Use analog connection instead (page 23). NO DISC • You tried to play or record with no disc in the recorder. - Insert an MD. NO SIGNAL • The recorder could not detect digital input signals. - Make sure that the source is connected firmly (page 14). P/B ONLY • You tried to record or edit on a premastered MD (P/B stands for "playback"). - Insert a recordable MD. PROTECTED • You tried to record or edit on a MD with the tab in the recordprotect position. - Slide the tab back (page 54). 61