Sony MZNH600D Operating Instructions - Page 46

Messages, If the following messages flash in the display window, check the chart below.

Page 46 highlights

Messages If the following messages flash in the display window, check the chart below. Message Meaning/Remedy AVLS NO VOLUME OPERATION • AVLS is set to "AVLS On" and so the volume cannot rise higher. , Set AVLS to "AVLS Off" (page 29). BLANKDISC • A disc with no recording on it is inserted. BUSY WAIT A MOMENT • The player is accessing disc information. • You tried to operate the player while it was accessing the recorded data. , Wait until the message goes out (in rare cases, it may take a few minutes). CANNOT RECORD OR PLAY • There is no audio data that can be played on the player. DATA SAVE • The player is writing information to the system file, such as the recorded data or editing information. , Wait until the message disappears from the display. D-L READY • MD Simple Burner is now ready to record an audio CD to the disc in the player using Simple mode (see "Software Operation"). EJECT DISC OK • The player has finished communicating with the computer and it is safe to eject the disc from the player or disconnect the dedicated USB cable. End • The player reached to the end of the disc while playing or pressing >. ERROR ERROR XX • There is an internal malfunction in the system. , Restart the operation by doing steps 1 to 3 on page 44. • There is an internal malfunction in the system. , Restart the operation by doing steps 1 to 3 on page 44. If the message appears again, please consult your nearest Sony dealer. FORMAT ERROR DISC • A disc with a format that the player does not support was inserted. • A disc formatted on the computer was inserted. , Insert a standard MD or a disc used in Hi-MD mode. , When formatting a disc on the computer, make sure to use the SonicStage Ver. 2.0 software. GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th group on a standard disc. , You can create only up to 255 groups (on a disc used in Hi-MD mode) or 99 groups (on a standard disc) on a disc. Keep the group number within 255 or 99. HOLD • The player is locked. , Slide HOLD against the arrow to unlock the player (page 15). LOW BATTERY • A battery is weak. , Replace the dry battery (page 15). NO BOOKMARK TRACK • You selected bookmark play without setting bookmarks. , Set bookmarks (page 25). 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

46
Messages
If the following messages flash in the display window, check the chart below.
Message
Meaning/Remedy
AVLS NO
VOLUME
OPERATION
AVLS is set to “AVLS On” and so the volume cannot rise higher.
,
Set AVLS to “AVLS Off” (page 29).
BLANKDISC
A disc with no recording on it is inserted.
BUSY WAIT A
MOMENT
The player is accessing disc information.
You tried to operate the player while it was accessing the recorded data.
,
Wait until the message goes out (in rare cases, it may take a few
minutes).
CANNOT
RECORD OR
PLAY
There is no audio data that can be played on the player.
DATA SAVE
The player is writing information to the system file, such as the recorded
data or editing information.
,
Wait until the message disappears from the display.
D-L READY
MD Simple Burner is now ready to record an audio CD to the disc in the
player using Simple mode (see “Software Operation”).
EJECT DISC OK
The player has finished communicating with the computer and it is safe
to eject the disc from the player or disconnect the dedicated USB cable.
End
The player reached to the end of the disc while playing or pressing
>
.
ERROR
There is an internal malfunction in the system.
,
Restart the operation by doing steps 1 to 3 on page 44.
ERROR XX
There is an internal malfunction in the system.
,
Restart the operation by doing steps 1 to 3 on page 44. If the message
appears again, please consult your nearest Sony dealer.
FORMAT
ERROR DISC
A disc with a format that the player does not support was inserted.
A disc formatted on the computer was inserted.
,
Insert a standard MD or a disc used in Hi-MD mode.
,
When formatting a disc on the computer, make sure to use the
SonicStage Ver. 2.0 software.
GROUP FULL
You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a standard disc.
,
You can create only up to 255 groups (on a disc used in Hi-MD
mode) or 99 groups (on a standard disc) on a disc. Keep the group
number within 255 or 99.
HOLD
The player is locked.
,
Slide HOLD against the arrow to unlock the player (page 15).
LOW BATTERY
A battery is weak.
,
Replace the dry battery (page 15).
NO
BOOKMARK
TRACK
You selected bookmark play without setting bookmarks.
,
Set bookmarks (page 25).