Sony NV-U74T Important Information - Page 11

• Data may be damaged in such occasions: - "Memory Stick Duo" is removed or the system is turned off during a read or write operation. - "Memory Stick Duo" is used in a location subject to static electricity or electrical noises. • We recommend that you backup any important data. • Do not bend, drop or apply strong shock to the "Memory Stick Duo." • Do not disassemble or modify the "Memory Stick Duo." • Do not allow the "Memory Stick Duo" to get wet. • Do not use or store the "Memory Stick Duo" in a location that is subject to: - Extremely high temperature, such as in a car parked in the sun - Direct sunlight - High humidity or places with corrosive substances Connector Write-protect switch Memo area • Do not touch the "Memory Stick Duo" connector with your finger or metallic objects. • You cannot record, edit or delete data if you slide the write-protect switch to LOCK. • When you slide the write-protect switch of the "Memory Stick Duo," use a thin-pointed device. • When you use a "Memory Stick Duo" without the write-protect switch, be careful not to edit or delete the data by accident. • When you write on the memo area of the attached label, do not write forcefully. • When you carry or store the "Memory Stick Duo," put it in the case supplied with it. * Abbreviation for "Memory Stick Micro." Note on LCD panel Some stationary blue, red or green dots may appear on the monitor. These are called "bright spots," and can happen with any LCD. The LCD panel is precision-manufactured with more than 99.99 % of its segments functional. However, it is possible that a small percentage (typically 0.01 %) of the segments may not light up properly. This will not, however, interfere with your viewing. Maintenance Cleaning • Clean the surface of the suction cup with a soft, wet lint-free cloth if it becomes dirty and attachment strength weakens. Be sure to dry the suction cup before reattaching. • Clean the display window with a commercially available cleaning cloth. Note If the suction cup leaves a trace on the windshield, wipe with water. Fuse replacement When replacing the fuse in the car battery adapter, be sure to use one matching the amperage rating stated on the original fuse (2.5 A). If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. 11