Sony NV-U83T Instruction Manual - Page 20
Activating the Bluetooth signal, Pairing with a cellphone, Searching from this unit - manual
UPC - 027242728530
View all Sony NV-U83T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Activating the Bluetooth signal 1 In the menu display, touch "Phone." , then 2 Select "Bluetooth Signal," then "ON." The signal is activated. The Bluetooth indicator in the bottom right of the unit lights up in blue. Pairing with a cellphone Pairing is required only the first time you connect to a cellphone. To pair this unit to a cellphone, you need to enter the same passkey* on this unit and on the cellphone. The passkey can be either your own selected number or the number determined by the cellphone. For details, see the manual of the cellphone. * Passkey may be called "passcode," "PIN code," "PIN number," "password," etc., depending on the cellphone. Searching from this unit The procedure to search for a cellphone from this unit is explained below. Check that the cellphone is set to allow for searching beforehand. 1 In the menu display, touch "Phone." , then 2 Select "Add Devices." A message asking you to set the cellphone to detectable appears. 3 Select "Search for Phone." After cellphone search is complete, the list of connectable cellphones appears. To list cellphones by address, select "Address." To list by name, select "Name."* * The address appears instead of the name if unavailable. 4 Select the cellphone to register. Pairing starts. 5 Enter the passkey. Perform the required operation also on the cellphone. A message appears stating that the pairing is complete. To connect to the cellphone, select "Connect." Searching from a cellphone The procedure to search for this unit from a cellphone is explained below. In this case, the name of the unit is registered as "nav-u," which can be changed in the phone setting (page 27). 1 Start searching for this unit from the cellphone. For details, see the manual of the cellphone. After you perform the required operation on the cellphone, the passkey input display appears on this unit. 2 Enter the passkey. A message appears stating that the pairing is complete. Connecting to a cellphone Once the Bluetooth signal is activated, the unit searches for the last connected cellphone, and connection is made automatically if possible. In this chapter, instructions on how to connect manually to paired cellphones are introduced. Before starting, be sure to activate the Bluetooth signal both on this unit and the cellphone. 1 In the menu display, touch , "Phone," then "My Devices." The list of paired cellphones appears. 2 Select the cellphone to connect. The confirmation display appears. 3 Select "OK." The unit is connected to the selected cellphone. The currently connected cellphone is indicated by in the paired cellphone list. To disconnect In step 2 above, select the cellphone to disconnect (one that is currently connected) c "OK." 20