Sony NW-A26HN Help Guide Printable PDF - Page 115
Installing your Walkman in a peripheral device such as a cradle, Built-in Bluetooth antenna
View all Sony NW-A26HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Set the HOLD switch to protect your Walkman against accidental operation during transportation. Slide the HOLD switch in the direction of the arrow ( ) to disable all operation buttons. Slide the HOLD switch to the opposite position to release the HOLD function. 9. Access lamp 10. microSD card slot Open the cover before inserting a microSD card. Insert a microSD card until it clicks into place to increase the available memory of your Walkman. 11. microSD card slot cover 12. Strap hole Use to attach a strap (not supplied). 13. Built-in Bluetooth antenna Do not cover the antenna part with your hands or other object when a Bluetooth connection is active. Doing so may interrupt the connection. 14. N-mark Touch a Bluetooth audio device equipped with the NFC function to this mark to connect it to your Walkman. 15. RESTART button Press the RESTART button with a small pin, etc. to restart your Walkman. (*1) Sound is not emitted from the wired headphones while your Walkman is connected to a device via a Bluetooth connection. Disconnect the Bluetooth connection to use wired headphones. Installing your Walkman in a peripheral device such as a cradle You may need to use an adaptor to install your Walkman in a peripheral device such as a cradle. In this case, use the adaptor (Type A) supplied with the device. Related Topic Turning the power on Turning the power off Home menu How to use the Home menu How to use the option menu Using the HOLD switch Inserting a microSD card Restarting your Walkman 109