Sony NWS203F Operation Guide - Page 73
Quick Start Guide. Audio songs, USB CONNECT does - update
UPC - 027242701977
View all Sony NWS203F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table of Contents Menu Index 73 Troubleshooting Connection with the computer/SonicStage (continued) Symptom SonicStage does not start up. "USB CONNECT" does not appear when connected to the computer with the supplied USB cable. The player is not recognized by the computer when it is connected to the computer. Cause/Remedy Your computer's system environment has changed, perhaps due to an update of the Windows operating system. The USB cable is not connected to a USB port on your computer properly. Disconnect the USB cable, and then reconnect it. Use the supplied USB cable. A USB hub is being used. Connecting the player via a USB hub may not work. Connect the player directly to the computer. Please wait for the authentication of the SonicStage software. Another application is running on the computer. Disconnect the USB cable, wait a few minutes, and reconnect it. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. The player's USB connection (USB Power) is set to "500mA." Set the "USB Power" to "100mA" ( page 52). The installation of the SonicStage software was not successful. Disconnect the player from your computer, and reinstall the software using the supplied CDROM ( "Quick Start Guide"). Audio songs registered with the earlier installation will be available with the new SonicStage installation. The USB cable is not connected to a USB port on your computer properly. Disconnect the USB cable, and then reconnect it. A USB hub is being used. Connecting the player via a USB hub may not work. Connect the player directly to the computer. Continued