Sony NWZ-S716F Quick Start Guide - Page 4

Parts and Controls Front Rear  BACK/HOME button*1 Press to go up one list screen level, or to return to the previous menu. Press and hold the BACK/HOME button to display the Home menu ( page 9). The 5-way button performs different functions, depending on the displayed screens. For details, refer to the "Player Controls and Their Screens" of the Operation Guide (PDF file).  5-way button Press the  button to start playback. Press the  button to confirm after  (play/pause/ confirm) button*2 / buttons selecting an item with the button. When using the up (), down (), left () or right () button with the 5-way button, press on the icon.  / buttons  RESET button Resets the player when you press the RESET button with a small pin, etc.  WM‑PORT jack Use this jack to connect the supplied USB cable, or optional peripheral devices, such as supported accessories for the WM‑PORT.  NOISE CANCELING switch By sliding the NOISE CANCELING switch in the direction of the arrow , the Noise Canceling function is activated ( page 8).  Headphone jack For connecting the headphones. Insert the jack pin until it clicks into place. If the headphones are not connected properly, the sound from the headphones may not sound right.  Strap hole This is used to attach a strap (sold separately).  Display The display may vary, depending on functions. For details, refer to the Operation Guide (PDF file).  VOL +*2/- button Adjusts the volume.  OPTION/PWR OFF button*1 Displays the Option menu. If you press and hold the OPTION/PWR OFF button, the screen turns off and the player enters the standby mode. If the standby mode is retained for about a day, the player turns off completely automatically ( page 12). *1 Functions marked with on the player are activated if you press and hold the corresponding buttons. *2 There are tactile dots. Use them to help with button operations.  HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch in the direction of the arrow , all operation buttons are disabled. If you slide the HOLD switch to the opposite position, the HOLD function is released. Continued 