Sony PCS-G50 Operating Instructions - Page 3
Open the Web Identify a user - web password
View all Sony PCS-G50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1. Open the Web page Enter the IP address assigned to the PCS-G50/G50P in the address line of your browser. The format of an address is: http://XXX.XXX.XXX.XXX/ For instance, if the IP address is "192.47.100.117", enter "http://192.47.100.117/" in the address line. Note When a proxy server in an external network segment has been set, the Gateway address in the PCS-G50/ G50P LAN setting must also be set. Or set your Web browser proxy setting to "No Proxy" for the PCSG50/G50P. 2. Identify a user Once you reach the Web page, the following window will be displayed asking you to identify yourself as the user. Enter one of the following user names (see below) into the "User Name" box and the corresponding password into the "Password" box, then click the [OK] button. Each character of a password is shown as "*" on the screen. When the user name and password are correct, the "Dial/Disconnect" page will come up. If an incorrect user name or password is entered three times, an error message appears on the screen. Notes on the user name and the password • When you enter "user" in the "User Name" box and then its password (Remote Access Password) in the "Password" box, you can access and check the "Phone Book" and "Setup" pages. • When you enter "super" in the "User Name" box and then its password (Phone Book Modification Password) in the "Password" box, you can access the "Phone Book" page, change the setting of the page, and register a new entry onto the page. And you can check the "Setup" page. • When you enter "sonypcs" in the "User Name" box and then its password (Administrator Password) in the "Password" box, you can access the "Phone Book" page, change the setting of the page, and register a new entry onto the page. And you can check and modify the "Setup" page. • If the corresponding password is not assigned, leave the "Password" box blank and click the [OK] button. • Administrator Setup Password, Phone Book Modification Password and Remote Access Password settings are in the Administrator Setup menu. 3