Sony PCV-E204 Reference Manual - Page 43
fully seated., Replace any add-in cards and other components that were removed.
View all Sony PCV-E204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Removing, Installing, and Replacing Components 35 4 Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket. Pin 1 side Press down here Handles Bank 0 Bank 1 Memory module (DIMM) 1 Indicates pin 1 OM04586.VSD 5 Carefully but firmly insert the edge of the module into the socket. 6 Press down firmly and evenly at both corners until the module is fully seated. When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place. 7 Replace any add-in cards and other components that were removed. 8 Replace the bottom panel (see "Replacing the Bottom Panel" on page 26).