Sony PCV-E314DS Reference Manual - Page 34
Removing the Front Panel, to access the two plastic tabs on the bottom of the front
View all Sony PCV-E314DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
26 VAIO Digital Studio Reference Manual Removing the Front Panel You must remove the front panel to install system memory, which requires pulling the diskette drive out about two inches. Follow steps 1 to 3 in the sequence shown to prevent damage to the front tray cover. 1 Insert a straightened paper clip into the emergency eject hole to open the tray. 2 Pull the tray out to its normal opened position. 3 Lift up on the front tray cover to remove it. 4 Push the tray back in. 5 Remove the bottom panel (see "Removing the Bottom Panel" on page 25) to access the two plastic tabs on the bottom of the front panel. 6 Push down and out on the two plastic tabs from inside the bottom of the chassis to release the bottom end of the front panel. Front tray cover Front panel Tab Push tabs out from inside chassis 7 Pull out the top end of the front panel to remove it. KY0055.VSD