Sony PCV-J120 Reference Manual - Page 45
Removing, Installing, and Replacing Components, Enter to exit the BIOS Setup Utility.
View all Sony PCV-J120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing, Installing, and Replacing Components 31 16 If the error message "Error: Check date and time settings." appears during the reboot sequence, press F2 during the reboot process to access the BIOS Setup Utility. If no error message displays, the computer's BIOS settings were retained during the battery replacement and you can skip the remaining steps. 17 Refer to the list you made in step 3 and restore any non-default BIOS settings (see "CMOS Setup Options" on page 69). 18 Select Exit Saving Changes from the main menu using the right arrow key. 19 Press Enter, type Y when prompted to discard changes, then press Enter to exit the BIOS Setup Utility. The computer's BIOS settings are now restored.
Removing, Installing, and Replacing Components
31
16
If the error message
“
Error: Check date and time settings.
”
appears
during the reboot sequence, press F2 during the reboot process to
access the BIOS Setup Utility. If no error message displays, the
computer
’
s BIOS settings were retained during the battery
replacement and you can skip the remaining steps.
17
Refer to the list you made in step 3 and restore any non-default BIOS
settings (see
“
CMOS Setup Options
”
on page 69).
18
Select Exit Saving Changes from the main menu using the right arrow
key.
19
Press Enter, type Y when prompted to discard changes, then press
Enter to exit the BIOS Setup Utility.
The computer
’
s BIOS settings are now restored.