Sony PCV-L400 Reference Manual - Page 100

DIMM Configurations, L2 Cache, Graphics, VAIO Computer Reference Manual, DIMM1

Page 100 highlights

92 VAIO Computer Reference Manual DIMM Configurations DIMM1* 0, 16, 32, 64, 128 DIMM2* 0, 16, 32, 64, 128 * The PCV-L400 is shipped with 64 MB. The PCV-L600 and PCV-L600S are shipped with 128 MB. SDRAM is expandable to 256 MB. Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. Supports SDRAM memory. Does not support EDO memory or buffered DIMM memory. Memory can be installed in either socket. Memory size can vary between sockets. DIMMs can be single- or double-sided. DIMMs must be 3.3V unbuffered 4-clock, 64-bit or 72-bit, 66 MHz or 100 MHz SDRAM module. Use only 100 MHz FSBsupported memory. Do not mix 66 MHz memory with 100 MHz memory. L2 Cache Installed Controller 512 kbytes secondary write-back cache (in processor), direct-mapped organization, BSB cache Intel 440BX Host Bridge/Controller Graphics Controller* ATI Rage LT Pro AGP 64-bit PCI graphics accelerator including 1X and 2X modes with sidebands Video memory 4 Mbytes Resolution (displayed resolution depends on the graphics display you use) True color (32 bits) Up to 1920 x 1080 at 70 Hz non-interlaced True color (24 bits) Up to 1920 x 1080 at 70 Hz non-interlaced High color (16 bits) Up to 1920 x 1200 at 70 Hz non-interlaced 256 colors (8 bits) Up to 1920 x 1200 at 70 Hz non-interlaced * Supports DDC-1 and DDC-2b standards for Plug and Play displays.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

VAIO Computer Reference Manual
92
DIMM Configurations
L2 Cache
Graphics
DIMM1
*
*
The PCV-L400 is shipped with 64 MB. The PCV-L600 and PCV-L600S are shipped with 128 MB. SDRAM is
expandable to 256 MB. Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. Supports
SDRAM memory. Does not support EDO memory or buffered DIMM memory. Memory can be installed in
either socket. Memory size can vary between sockets. DIMMs can be single- or double-sided. DIMMs must
be 3.3V unbuffered 4-clock, 64-bit or 72-bit, 66 MHz or 100 MHz SDRAM module. Use only 100 MHz FSB-
supported memory. Do not mix 66 MHz memory with 100 MHz memory.
DIMM2
*
0, 16, 32, 64, 128
0, 16, 32, 64, 128
Installed
512 kbytes secondary write-back cache (in processor),
direct-mapped organization, BSB cache
Controller
Intel 440BX Host Bridge/Controller
Controller
*
*
Supports DDC-1 and DDC-2b standards for Plug and Play displays.
ATI Rage LT Pro AGP 64-bit PCI graphics accelerator
including 1X and 2X modes with sidebands
Video memory
4 Mbytes
Resolution (displayed resolution depends on the graphics display you use)
True color (32 bits)
Up to 1920 x 1080 at 70 Hz non-interlaced
True color (24 bits)
Up to 1920 x 1080 at 70 Hz non-interlaced
High color (16 bits)
Up to 1920 x 1200 at 70 Hz non-interlaced
256 colors (8 bits)
Up to 1920 x 1200 at 70 Hz non-interlaced