Sony PCV-L600 Reference Manual - Page 26
INTEN Jumper, Removing the System Cover, VGA Enable VGAEN, INTEN
View all Sony PCV-L600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
18 VAIO Computer Reference Manual To change the VGA enable jumper, perform the following steps: 1 Remove the system cover (see "Removing the System Cover" on page 20). 2 Set the jumper to enable or disable (see "VGA Enable (VGAEN)" on page 60). 3 Reinstall the system cover (see "Replacing the System Cover" on page 21). INTEN Jumper You can enable or disable the onboard VGA interrupt if you install a VGA PCI add-in card. To change the INTEN jumper, perform the following steps: 1 Remove the system cover (see "Removing the System Cover" on page 20). 2 Set the jumper to enable or disable (see "INTEN" on page 61). 3 Reinstall the system cover (see "Replacing the System Cover" on page 21).
VAIO Computer Reference Manual
18
To change the VGA enable jumper, perform the following steps:
1
Remove the system cover (see
“Removing the System Cover”
on
page 20).
2
Set the jumper to enable or disable (see
“VGA Enable (VGAEN)”
on
page 60).
3
Reinstall the system cover (see
“Replacing the System Cover”
on
page 21).
INTEN Jumper
You can enable or disable the onboard VGA interrupt if you install a VGA
PCI add-in card.
To change the INTEN jumper, perform the following steps:
1
Remove the system cover (see
“Removing the System Cover”
on
page 20).
2
Set the jumper to enable or disable (see
“INTEN”
on page 61).
3
Reinstall the system cover (see
“Replacing the System Cover”
on
page 21).