Sony PCV-R528DS Reference Manual - Page 51
Installing a 3º” Internal Hard Disk Drive, holder to the top of the chassis.
View all Sony PCV-R528DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removing, Installing, and Replacing Components 43 Installing a 3½" Internal Hard Disk Drive Your system comes with an available bay to hold an additional 3½" hard disk drive. The drive you install must not require front panel access. The hard disk drive access light blinks when either internal drive is active. ! Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all attached peripherals, and then unplug the power cord. 1 Configure the jumpers on the new drive as a primary slave (see your drive's documentation for configuration instructions). Power connector Jumpers Drive connector KY0084.VSD 2 Disconnect the power cord from the computer. 3 Remove the cover (see "Removing the Cover" on page 24). 4 Remove the four screws (A in next diagram) that secure the drive holder to the top of the chassis.