Home » Sony Manuals » Desktops » Sony PCV-R549DS » Manual Viewer

Sony PCV-R549DS Online Help Center (VAIO User Manual) - Page 345

drive. The hard disk drive access light blinks when either internal drive is active. For information

Add to My Manuals
Save this manual to your list of manuals

Page 345 highlights

The values stored in the CMOS memory are now reset to the factory default values. You must run the Setup utility to reset the date, time, passwords, and other changes you may have made to the BIOS settings. If you do not wish to customize your BIOS settings, you do not need to run the Setup utility. If you simply wish to reset the date and time, see Windows® Help for instructions. Installing an Additional Hard Disk Drive Your computer comes with an available internal bay to hold a second standard 3½-inch hard disk drive. (Some models, such as Configure-to-Order systems, may already have a second hard disk drive.) The hard disk drive access light blinks when either internal drive is active. For information on how to install additional drives into the external drive, see the computer Reference Manual. You can download the Reference Manual from the Sony Web site at http://www.sony.com/pcsupport. Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all attached peripherals, and then unplug the power cord.  Configure the jumpers on the new drive as a slave (see your drive's documentation for configuration instructions).  Remove the cover as described in Removing the Cover.  Remove the screws that secure the drive holder to the chassis top.  Slide the drive holder forward and then out. Page 345

Section	Page
Notice to Users	1
Read Me First	2
Frequently Asked Questions (FAQs)	7
Supplementary Information	12
About Your Computer's Microprocessor (PCV-R547DS only)	17
Recovering Microsoft® Word 2000	22
Standby Mode	27
Connecting Computers by i.LINK Interface	32
Upgrading Your Computer	37
Hard Drive Partition	42
Switching Between NTSC and PAL Standards	47
VAIO Smart™ Keyboard Default Settings	52
Memory Upgrade Specifications	57
Restoring Outlook Express	62
Self-launching CDs	67
Enabling Smart Connect	72
If You Get an Error Message When Your Modem Tries to Dial	77
For Answers to Your Software Questions	82
Welcome	87
Features	91
Unpacking Your Computer	95
Computer and Supplied Accessories	99
Manuals	103
Recovery CDs	107
Other	111
Software Library	115
Back Panel Overview	119
Front Panel Overview	123
Setting Up Your VAIO® Digital Studio Computer	127
Registering Your Computer	131
Using the VAIO Smart™ Keyboard and the Wheel Mouse	135
Connecting the Optional Palmrest	139
Changing the Window Design of Sony Software	143
VAIO Action Setup (PCV-R547DS/PCV-R549DS only)	147
Using the Wheel Mouse	151
Using the Standby Function	155
Standby Mode Indicators	159
Shutting Down Your Computer	163
Sony Digital Media Park Applications	167
Media Bar™	170
DVgate™ Applications	173
PictureGear™	176
Smart Capture	179
Using Digital Video	182
Connecting a Digital Video Recorder	185
Using DVgate	188
Hard Drive Partition	191
Applications That Use the TWAIN Driver	194
i.LINK (IEEE-1394) Compatibility	197
Enabling Smart Connect	200
Troubleshooting	203
Using the System Recovery CD(s)	215
Using the Application Recovery CD(s)	227
About the Software on Your Computer	239
About Your Recovery CDs	251
For Answers to Your Software Questions	263
Sony Service Center	275
Specifications	287
Upgrading and Maintaining Your VAIO® Computer	299
Overview	306
Removing the Cover	313
Inserting an Add-in Board	320
Adding Memory	327
Replacing the Lithium Battery	334
Installing an Additional Hard Disk Drive	341
Replacing the Cover	348
VAIO® Consumer Information Guide	355
Notice to Users	363
Safety Information	371
Regulatory Information	379
Choosing a Location for Your Computer	387
Resources	395
Notes on Use	403
On the Power Source	411
On Disposal of the Lithium Battery	419
On Handling	427
On Installation	435
On Moisture Condensation	443
On Upgrading the System	451
On Handling an LCD Display	459
On Handling a CRT Display	467
On Using the Hard Disk Drive	475
On Handling Diskettes	483
On Handling CD or DVD Media	491
On Cleaning CD or DVD Media	499

Match case Limit results 1 per page

The values stored in the CMOS memory are now reset to the factory default values. You must run the Setup

utility to reset the date, time, passwords, and other changes you may have made to the BIOS settings. If you do

not wish to customize your BIOS settings, you do not need to run the Setup utility. If you simply wish to reset the

date and time, see Windows

Help for instructions.

Installing an Additional Hard Disk Drive

Your computer comes with an available internal bay to hold a second standard 3½-inch hard disk

drive. (Some models, such as Configure-to-Order systems, may already have a second hard disk

drive.) The hard disk drive access light blinks when either internal drive is active. For information on

how to install additional drives into the external drive, see the computer

Reference Manual

. You can

download the

Reference Manual

from the Sony Web site at

http://www.sony.com/pcsupport

Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all

attached peripherals, and then unplug the

power cord.



Configure the jumpers on the new drive as a slave (see your drive's documentation for

configuration instructions).



Remove the cover as described in

Removing the Cover



Remove the screws that secure the drive holder to the chassis top.



Slide the drive holder forward and then out.

Page 345