Sony PCV-RX540 System Reference Manual - Page 54
Installing a 3.5-inch Internal Hard Disk Drive - vaio hard drive
View all Sony PCV-RX540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
42 VAIO Digital Studio System Reference Manual Installing a 3.5-inch Internal Hard Disk Drive Your system comes with an available bay to hold an additional 3.5-inch hard disk drive. The drive you install must not require front panel access. The hard disk drive access light blinks when either internal drive is active. ✍ Some models, such as Configure-to-Order (CTO) systems, may already have a second hard disk drive installed. ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. 1 Configure the jumpers on the new drive as a slave device (see your drive's documentation for configuration instructions). Power connector Jumpers Drive connector 2 Remove the side cover (see "Removing the Side Cover" on page 24).