Sony PCV-RX581 System Reference Manual - Page 39
Removing, Installing, and Replacing Components, Covering, an Open I/O Slot, Replacing the Side Cover
View all Sony PCV-RX581 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removing, Installing, and Replacing Components 27 ! Hold the add-in card by its edges and do not touch any components or contacts on the card. Static electricity in your body may damage sensitive components on the card. As a precaution, touch any exposed metal part on the metal chassis (preferably the metal part on the power supply) before handling an add-in card to discharge any static electricity in your body. 5 If you do not replace the card or install another add-in card, install a slot cover over the vacant slot at the rear of the chassis (see "Covering an Open I/O Slot" on page 38). 6 Replace the side cover (see "Replacing the Side Cover" on page 25).
Removing, Installing, and Replacing Components
27
5
If you do not replace the card or install another add-in card, install a
slot cover over the vacant slot at the rear of the chassis (see
“Covering
an Open I/O Slot”
on page 38).
6
Replace the side cover (see
“Replacing the Side Cover”
on page 25).
!
Hold the add-in card by its edges and do not touch any components or
contacts on the card. Static electricity in your body may damage
sensitive components on the card. As a precaution, touch any exposed
metal part on the metal chassis (preferably the metal part on the power
supply) before handling an add-in card to discharge any static electricity
in your body.