Sony PCWA-A100 Access Point Help File - Page 17
Setting up cable connection, Hints
View all Sony PCWA-A100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting up cable connection Selecting Cable Modem for Connection Mode in Setting mode-dependent parameters displays the Setup of Cable Modem Connection Mode dialog box. Hints The Access Point acts as a NAT router w hen Cable Modem is selected for Connection Mode. Select this mode w hen connecting the Access Point to a DSL modem if your DSL provider does not use PPPoE for connection. 1. Click the IP Se tup tab. This dialog box is for entering the information required for configuring a WAN (Wide Area Netw ork) and assigning local IP addresses. Static IP Address (WAN-side) Check this option if the IP address to be used on the computer is specified in your cable modem contract, then fill in the follow ing fields. If this option is left unchecked, the IP address is automatically assigned w hen connection to the ISP is established. Hint Ask your ISP (cable TV company) for more information. WAN IP Address Enter the IP address of the WAN. WAN Subnet Mask Enter the subnet mask of the WAN. Default Router Enter the IP address of the default router. DNS Server 1 Enter the primary DNS server address. DNS Server 2 Enter the secondary DNS server address. Local IP Address Enter the IP address of the LAN. Hint The Local IP Address is assigned by default. There is no particular need to change them. Local Subnet Mask Enter the subnet mask of the LAN. Hint The Subnet Mask is assigned by default. There is no particular need to change them. Page 17