Sony PEG-NR70 Read This First Operating Instructions - Page 63
Setting up your Sony CLI, Handheld, Advanced, directly at the IR port of the receiving handheld.
UPC - 027242603004
View all Sony PEG-NR70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 3 Setting up your Sony CLIÉ Handheld - Advanced 5 Tap the application you want to transfer. Note Some applications are copy-protected and cannot be beamed. These are listed with the lock icon next to them. 6 Tap Beam. 7 When the Beam dialog box appears, point the IR port directly at the IR port of the receiving handheld. Tip For best results, the handhelds should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between the two handhelds must be clear of obstacles. Beaming distance to other Palm OS PDA devices may be different. 8 Wait for the Beam dialog box to indicate that the transfer is complete before you continue using your CLIÉ handheld. 63
63
Setting up your Sony CLI
É
Handheld
–
Advanced
Chapter 3
5
Tap the application you want to transfer.
Note
Some applications are copy-protected and cannot be beamed. These are
listed with the lock
icon next to them.
6
Tap Beam.
7
When the Beam dialog box appears, point the IR port
directly at the IR port of the receiving handheld.
Tip
For best results, the handhelds should be 4 to 8 inches (approximately 10 to
20 centimeters) apart, and the path between the two handhelds must be clear
of obstacles. Beaming distance to other Palm OS PDA devices may be
different.
8
Wait for the Beam dialog box to indicate that the
transfer is complete before you continue using your CLI
É
handheld.