Sony PEGA-KB11 Operating Instructions - Page 2
Disabling the Jog Dial functions - cords
View all Sony PEGA-KB11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Assigning Application Shortcut Keys You can assign application shortcuts to the 1 - 9 keys at the top of the keyboard. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner of the General settings screen, and select [CmdKeys]. The CmdKeys settings screen appears. 3 Tap V to the right of any Cmd+number key ([Cmd+1] through [Cmd+9]), and select the application you want to assign to the Cmd+number key. 4 After setting application shortcuts, tap the icon to return to the home screen. z Testing the application shortcut you have set Press the numerical key (1-9) to which you have assigned an application shortcut in Step 3 while pressing the Cmd key on the keyboard to make sure that the assigned application starts correctly. If the application does not start, assign the application shortcut again. Setting the Pointer The pointer can be displayed on your CLIÉ handheld. The pointer function is set to off at the factory default setting. To activate the function, follow the procedures below. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner, and select [Pointer]. The Pointer settings screen appears. 3 Tap the check box of [Enable Screen Pointer] to tick the item. 4 After setting, tap the icon to return to the home screen. Use the pointer on the display of your CLIÉ handheld 1 Hold Alt key on the home screen or other application screen. The pointer appears on the screen. 2 Move the pointer using the arrow keys (Alt + T, t, R, and r). 3 Move the pointer on the item you want to select, and press Alt + Enter. The item that the pointer is located is selected. Change the pointer rate Change the [Pointer Acceleration] and [Maximum Speed] by dragging the marker arrows with your stylus in the pointer settings screen. Changing the pointer size Tap V to the right of [Pointer Size] in the Pointer settings screen to change the pointer size. Changing Other Settings Changing the key layout setting You can change the key layout of the keyboard. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner of the General settings screen, and select [Layout]. The Layout settings screen appears. 3 After setting the key layout, tap V to the right of [Layout], and select a key layout. 4 After setting the layout, tap the the home screen. icon to return to Changing the tab key movement You can set the tab key to either move within fields or move to a tab stop when the tab key is set in the application you use. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner of the General settings screen, and select [Layout]. The Layout settings screen appears. 3 Tap V to the right of [Tab], and select either setting. 4 After setting the tab movement, tap the return to the home screen. icon to Using the Jog Dial function with the keyboard You can select the list item or the menu with the keys on the keyboard just like you use Jog Dial. 1 Press the R or r arrow key while pressing the Cmd key on the home screen or other application screen. The selected icon or item appears inverted. 2 Press the Enter key while pressing the Cmd key on the item to be selected. The item that appears inverted is selected. Disabling the Jog Dial functions You can suspend the Jog Dial functions temporarily. The Jog Dial functions are enabled at the factory default setting. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner of the General settings screen, and select [Layout]. The Layout settings screen appears. 3 Tap the check box of [Enable Jog-Dial] to remove the tick on the General settings screen. The Jog-Dial functions are suspended, and you cannot use the Jog-Dial navigator from your keyboard. 4 After setting, tap the icon to return to the home screen. To use the Jog-Dial navigator again, tap the check box of [Enable Jog-Dial] to tick the item on the Layout settings screen. Viewing Layout information Tap [Layout Info] at the lower left corner of the Layout settings screen. The current key layout setting and copyright are displayed. Tap [Manage Layouts] in the lower right corner of the Layout setting screen to view the information when the function is extended. Viewing The Help You can view the explanation for main terms and functions, and keyboard shortcuts. 1 Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen. The most recent settings screen appears. 2 Tap V in the upper right corner of the General settings screen, and select [Help]. The Help screen appears. For a complete list of these shortcuts, refer to the shortcut lists below. After viewing the shortcuts Tap the icon to return to the home screen. Shortcut list of cursor movements The following list shows the keyboard shortcuts for moving the cursor and selecting text. Keys to press Ctrl + T Ctrl + t Ctrl + Shift + T Ctrl + Shift + t Shift + T Shift + t Shift + R Shift + r Cmd + T Cmd + t Fn + R or Cmd + R Fn + r or Cmd + r Shift + Tab Tab Function Moves the cursor one word to the left. Moves the cursor one word to the right. Highlights the word to the left of the cursor. Highlights the word to the right of the cursor. Highlights the character to the left of the cursor. Highlights the character to the right of the cursor. Highlights one line of text above the cursor. Highlights one line of text below the cursor. Moves the cursor to the top of the line.** Moves the cursor to the end of the line.** Scrolls upward. Scrolls downward. Tabs forward through fields.* Tabs backward through fields.* * It may not function depending on the types of applications. ** If you type the sentence of more than one line, the cursor may not move as the table shows above, depending on the types of applications. z To use the keys on which the blue characters are printed Press each key while holding the Fn key to access the commands that are printed in blue. To use on-screen button shortcuts, perform one of the following procedures; - Enter the button name while pressing the Fn key. - Enter the first letter of the button name that is not used in the button name, or other one letter while pressing the Ctrl and Cmd keys at the same time. Keys to press Fn + Details Ctl + Cmd + n Ctl + Cmd + l Function Selects Details. Selects Done. Selects Details. List of the menu commands The following list shows the keyboard shortcuts for the editing menu commands. Keys to press Function Ctl + x Cuts selected text. Ctl + c Copies selected text. Ctl + v Pastes cut or copied text. * The cut, copy, and paste menu commands may vary depending on the applications. List of other special keystrokes The following list shows other key combinations available on this keyboard. Keys to press Fn + Cmd Fn + = ( ) Function Enters shortcut mode. Turns the backlight on/off. List of Accented characters The following list shows the example for inputting accented letter "a". To input other accented letter, type the desired letter instead of letter "a" in the list. Keys to press a + Fn + ' a + Fn + ^ (Fn-Shift-6) a + Fn + ; a + Fn + ` a + Fn + ~ (Fn-Shift-`) a + Fn + o Function Acute accent (á) Circumflex accent (â) Dieresis accent (ä) Grave accent (à) Tilde accent (ã) Dot accent (å) List of other extended characters Keys to press Fn + O (Fn-Shift-o) Fn + o Fn + ? (Fn-Shift-/) Fn + ! (Fn-Shift-1) Fn + A (Fn-Shift-a) Fn + a Fn + b Fn + w Fn + c Function Capital naught (Ø) Lowercase naught (ø) Upside down ? (¿) Upside down Bullet (•) Cedilla (ç) List of Creating symbols Keys to press Fn + g Fn + d Fn + Fn + u Fn + \ Fn + p Fn + r Fn + s Fn + t Fn + y Fn + + (Fn-Shift-=) Fn + 2 Fn + 3 Fn + 4 Fn + $ (Fn-Shift-4) Fn + f Fn + [ Fn + ] Fn + { (Fn-Shift-[) Fn + } (Fn-Shift-]) Function Copyright symbol (©) Degree symbol (˚) Divide symbol (÷) Micro symbol (µ) Paragraph symbol (¶) British Pound symbol (£) Registered trademark (®) Section symbol (§) Trademark symbol (™) Yen symbol (¥) Plus/minus symbol (±) 1/2 3/4 1/4 Cents (¢) Script f (ƒ) Left single curly quote (') Right single curly quote (') Left double curly quote (") Right double curly quote (") Note Make sure to set the Caps lock to off when you input the characters other than letters using the on-screen button shortcuts. Using the International Keyboard Settings The Palm OS International keyboard settings are supported by the keyboard software which is preinstalled from the supplied CD-ROM. To input characters using the settings, press the Alt key and the desired character. List of calculator functions The following list shows the key combinations for calculator functions. Keys to press c e m p r Function Adds, Subtracts, Multiplies, Divides, and Equals Clears all Clears last entry Clears memory Puts a currently displayed number into memory. Recalls a value in memory. Troubleshooting Nothing happens when you type on the keyboard. - Check that your CLIÉ handheld is charged. - Make sure that your CLIÉ handheld is connected to the keyboard correctly. - Confirm that the application for this keyboard is installed properly. - Confirm that the application for this keyboard is enabled. A HotSync operation cannot be performed when you connect this keyboard to your CLIÉ handheld. - You cannot use this keyboard as a cradle for your CLIÉ handheld. To perform a HotSync operation, remove the keyboard, and attach a cradle to your CLIÉ handheld. HotSync screen appears when you connect this keyboard to your CLIÉ handheld. - The driver may not be installed correctly. Delete the current driver, and install the driver again. If the installed driver is not deleted, operational malfunction may occur. In this case, perform a soft reset following the operation manual of CLIÉ handheld. The keyboard operations suddenly stops. - The keyboard may not function if you perform a soft reset when the keyboard is connected to your CLIÉ hendheld. Disconnect the keyboard before performing a soft reset on your CLIÉ handheld. Do not connect the keyboard to your CLIÉ handheld while it is starting again. Specifications Power consumption 7.5 mW (in normal operation) Operating temperature 41 ˚F to 95 ˚F (5 ˚C to 35 ˚C) Dimensions 3 3/4 × 5 1/8 × 7/8 inches (93 × 130 × 22 mm) (w/h/d) (Excluding the largest projecting part) Mass. Approx. 8.6 oz (244 g) Accessories Operating Instructions Installation CD-ROM Carrying pouch Warranty cards End-User's Lisense Agreement Design and specifications are subject to change without notice. Notes on use • Do not subject the unit to: - Extreme heat or cold - Dust, dirt, or sand - High humidity - Vibration - Strong magnetic fields - Mechanical shock - Direct sunlight (for extended periods of time) • Do not drop the unit. • Be sure that nothing metallic comes into contact with the metal parts of this unit. If this happens, a short circuit may occur and the unit may be damaged. • Do not operate the unit if it has a damaged cord or if it has been dropped or damaged. • Always keep the metal contacts clean. • Do not disassemble or convert the unit. • While the unit is in use, it gets warm. This is normal. Cleaning Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.