Sony PMC-202 Operating Instructions - Page 26

Troubleshooting Symptom Remedy The power does not come on. • Connect the AC power cord securely. ra There is no audio. a) a) • Make sure the display window is displaying the function you want to operate. • Adjust the volume. • Unplug the headphones when listening through speakers. The audio is weak or has poor • Move the player away from the TV. quality. • If you are using the remote while listening to O AM radio, noise may be heard. This is unavoidable. et The picture of your TV becomes • If you are listening to an FM program near the unstable. TV with an indoor antenna, move the player away from the TV. "no disc" lights in the display even • Insert the CD with the label surface up. when a CD is in place. The CD does not play. a) 0 • Make sure that the disc compartment is closed. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the disc compartment open for about an hour to dry moisture condensation. • Make sure "CD" appears in the display. The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged. • Place the player in a location free from vibration. The tape does not move when you • Close the cassette compartment securely. a) press an operation button. ns The REC • button does not • Make sure the safety tab on the cassette is in aa) ro function/The tape does not play. place. • Make sure that "TAPE" appears in the display. The tape does not erase completely. • Clean the erasing heads (see page 28.) 26 Additional Information