Sony PMW100 User Manual (PMW-100 Memory Camcorder Operation Manual for Firmwar - Page 46
Recording Audio Signals, Using the Built-in Stereo Microphones, Using External Inputs
View all Sony PMW100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Recording Recording Audio Signals 3 Connect the microphone cable to the AUDIO IN CH-1/CH-2 connectors. Four channels (CH-1/CH-2/CH-3/CH-4) of audio can be recorded (Linear PCM recording) in synchronization with video recording. You can use the built-in stereo microphones (omni-directional electret condenser microphones) or 2-channel external audio inputs to the AUDIO IN connectors by switching with the AUDIO IN switches. Using the Built-in Stereo Microphones Set the AUDIO IN switches, both CH-1 and CH-2 (page 16), to INT. Using External Inputs 1 Set the AUDIO IN switches CH-1 and CH-2 to EXT. 2 Connect external audio sources to the AUDIO IN connectors CH-1 and CH-2 (page 14). 3 Set the input (LINE/MIC/MIC+48V) switches CH-1 and CH-2 (page 14) to LINE (line level: +4 dBu). Using an External Microphone You can use an external microphone for recording, such as the ECM-673 Electret Condenser Microphone. 1 Lift up the handle of the external microphone holder (page 14) and open the cover. 2 Attach a microphone, then return the external microphone holder cover to its original position to secure it. to AUDIO IN Cable clamp External microphone 4 Set the corresponding AUDIO IN switch (CH-1/CH-2) (page 16) to EXT. 5 Set the corresponding input (LINE/ MIC/MIC+48V) switch (CH-1/CH-2) (page 14) according to the connected microphone. MIC: For a microphone that requires no power supply MIC +48V: For a microphone that requires +48V power supply (such as the ECM673) Adjusting the Audio Recording Levels To adjust the levels automatically (AGC) When the AUDIO SELECT switches CH-1 and CH-2 (page 16) are set to AUTO, the audio recording levels are automatically adjusted. 46 Recording Audio Signals