Sony PMWTD300 Product Manual (PMW-TD300 Operations Manual) - Page 153
Operating Clips with a Computer, Using the ExpressCard Slot of a Computer
View all Sony PMWTD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Chapter 8 Connecting External Devices SxS PRO 8GB Operating Clips with a Computer The clips recorded on SxS memory cards with this camcorder can be controlled on a computer or edited using the optional nonlinear editing software. For these purposes, the clips on an SxS memory card can be operated by directly loading the card in a computer or by connecting the camcorder or the optional SBAC-US10 SxS Memory Card USB Reader/Writer to the computer, using an USB cable as shown below. Using the ExpressCard Slot of a Computer If the computer is equipped with an ExpressCard/ 34 or ExpressCard/54 slot, you can directly insert the SxS memory card containing clips recorded with this camcorder and access to the files. For the operating requirements for the computer, see "Using the Software" (page 17). Note The SxS Device Driver Software and SxS UDF driver software on the CD-ROM supplied with the camcorder must be installed on your computer. Before installation, be sure to read the enclosed SxS Device Driver Software End-User License Agreement. For information on installation of the driver software, refer to the ReadMe on the supplied CDROM. For support information for the driver software, visit the following URL: http://www.sony.net/SxS-Support/ To the ExpressCard slot SxS memory card Computer with SxS Device Driver Software installed With a Windows computer Check that a Removable Disk appears in My Computer. This indicates normal status. With a Macintosh computer An icon is displayed on the menu bar. USB Connection with a Computer Preparations When you connect the camcorder to a computer using a USB cable (not supplied), the memory cards in the left slots are acknowledged as extended drives by the computer. When memory cards are inserted in left slots A and B, they are acknowledged as two independent extended drives by the computer. USB cable (not supplied) Notes • When connecting the USB cable to the computer, be careful to check the form and direction of the PC connector. • The camcorder does not work on the bus power from the computer. To start USB connection When you connect a computer to the USB connector with a USB cable (not supplied), the message "Connect USB Now?" is displayed to prompt you to confirm that you wish to enable the USB connection. If you select "Cancel" or push the MENU CANCEL/PRST/ESCAPE down to the ESCAPE Operating Clips with a Computer 153