Sony PMWTD300 Product Manual (PMW-TD300 Operations Manual Supplement) - Page 16

Making a Wi-Fi Connection, To make a network setting, To make a connection in ad hoc mode

Get Sony PMWTD300 PDF manuals and user guides View all Sony PMWTD300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

External device connector Cable holder Making a Wi-Fi Connection Two types of Wi-Fi connections are available. In "ad-hoc mode", you can make a peer-to-peer WiFi connection between a computer and camcorder. In "infrastructure mode", you can make Wi-Fi connections between a computer and multiple camcorders via a wireless LAN access point (building a LAN). To make a network setting Change settings under MAINTENANCE >Network Setting in the setup menu as required. Item Setting DHCP Setting that specifies whether to acquire the IP address automatically from a DHCP server Enabled: Acquire automatically. Disabled: Do not acquire automatically (factory default setting). IP Address IP address a) (factory default setting: 192.168.1.10) Subnet Mask Subnet mask (factory default setting: 255.255.255.0) Default Default gateway (factory default Gateway setting: 0.0.0.0) User Name User name for log-in (factory default setting: admin) Password Password for log-in (factory default setting: model name "pmw-td300") 16 Using a Wi-Fi Adapter a) The IP address determined by DHCP server is displayed here. When you have changed a setting Set the Set item to [Execute]. When a confirmation message appears, turn the MENU knob to select "Execute" and press the knob. To make a connection in ad hoc mode 1 Refer to "Settings on the Computer" under "Making a Wi-Fi Connection to Your Computer (Ad hoc Mode)" in the Operating Instructions supplied with the CBK-WA01 to make settings on the computer. 2 Start a connection on the computer. 3 Set MAINTENANCE >Wi-Fi Setting >Wi-Fi to [Enable] in the setup menu. 4 Set MAINTENANCE >Wi-Fi Setting >Scan Networks to [Execute] and press the MENU knob. The camcorder starts scanning for a network connection. When networks are detected, the NETWORK SCAN list appears. 5 Turn the MENU knob to select a network and press the knob. The MAINTENANCE menu appears again. 6 Confirm that the settings for the Wi-Fi Setting item conform to the network setting on the computer. SSID (network name): Selected network name Network Type (connection mode): Adhoc CH (channel): 1 Authentication (network authentication): Depending the settings on the computer, Open, Shared or WPA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
Using a Wi-Fi Adapter
16
Two types of Wi-Fi connections are available. In
“ad-hoc mode”, you can make a peer-to-peer Wi-
Fi connection between a computer and
camcorder. In “infrastructure mode”, you can
make Wi-Fi connections between a computer and
multiple camcorders via a wireless LAN access
point (building a LAN).
To make a network setting
Change settings under MAINTENANCE
>Network Setting in the setup menu as required.
a) The IP address determined by DHCP server is
displayed here.
When you have changed a setting
Set the Set item to [Execute]. When a
confirmation message appears, turn the MENU
knob to select “Execute” and press the knob.
To make a connection in ad hoc mode
1
Refer to “Settings on the Computer”
under “Making a Wi-Fi Connection to
Your Computer (Ad hoc Mode)” in the
Operating Instructions supplied with
the CBK-WA01 to make settings on the
computer.
2
Start a connection on the computer.
3
Set MAINTENANCE >Wi-Fi Setting
>Wi-Fi to [Enable] in the setup menu.
4
Set MAINTENANCE >Wi-Fi Setting
>Scan Networks to [Execute] and press
the MENU knob.
The camcorder starts scanning for a network
connection.
When networks are detected, the
NETWORK SCAN list appears.
5
Turn the MENU knob to select a
network and press the knob.
The MAINTENANCE menu appears again.
6
Confirm that the settings for the Wi-Fi
Setting item conform to the network
setting on the computer.
SSID (network name):
Selected network
name
Network Type (connection mode):
Adhoc
CH (channel):
1
Authentication (network authentication):
Depending the settings on the computer,
Open, Shared or WPA
Making a Wi-Fi Connection
Item
Setting
DHCP
Setting that specifies whether to
acquire the IP address
automatically from a DHCP server
Enabled:
Acquire automatically.
Disabled:
Do not acquire
automatically (factory default
setting).
IP Address
IP address
a)
(factory default
setting: 192.168.1.10)
Subnet Mask
Subnet mask (factory default
setting: 255.255.255.0)
Default
Gateway
Default gateway (factory default
setting: 0.0.0.0)
User Name
User name for log-in (factory
default setting: admin)
Password
Password for log-in (factory default
setting: model name “pmw-td300”)
Cable holder
External device connector