Sony PXW-Z750 Operating Instructions - Page 15
Network Status 1 screen, Overview: Screen Display
View all Sony PXW-Z750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
15 1. Overview: Screen Display Display item SD Utility Description Remaining capacity (bar graph and remaining capacity) and media life (displayed only if available) of media in UTILITY SD card slot A mark is displayed if the media is protected. Network Status 1 screen Display item Setting Wireless Network Description Network setting status Wireless network setting status Device Name IP Address (Wireless) Name of attached USB wireless LAN module device IP address of wireless LAN connection MAC Addr. (Wireless) Wireless Network MAC address of device attached the USB wireless LAN module connector Modem setting status Device Name IP Address (Modem) Name of attached modem device IP address of attached modem device Wired LAN Wired LAN Remote Wired LAN network connection status Remote control enabled/ disabled state when connected using a LAN cable Display item IP Address (Wired) Description IP address of wired LAN connection Network Status 2 screen Display item NW Client Mode Status CCM Name Streaming Status Description Network client mode status For details about the status, see "Network client mode status" (page 15). Name of the connected CCM when using network client mode Streaming distribution status Streaming Size Picture size of the currently selected streaming setting Streaming Bit Rate Streaming Type Streaming Dest. Add. Streaming Dest. Port Number of Distribution File Transfer Bit rate of the currently selected streaming setting Type of the currently selected streaming setting Streaming destination address Streaming destination port Number of streaming distribution destinations File transfer progress status Transfer to: Server name of file transfer destination Network client mode status Status display Off State Description CCM not Network client mode connected is off. Connected CCM Network client mode connected is on, CCM is connected, and CCM control is enabled. Connecting Connecting Attempting to connect to CCM to CCM (or (disconnected) disconnecting). Wait until connection (disconnection) is successful. If the status does not change from "Connecting," the CCM address setting may be incorrect. Check that the address is set correctly. Awaiting CCM Network client mode connection is on, but the network standby setting is off. Enable the network setting to connect to the CCM. Address Error CCM address error The host name or IP address of the CCM to connect may be incorrect. Check that the setting is correct. Auth. Failed CCM user name/ password error The user name or password used to connect to the CCM may be incorrect. Check that the setting is correct. No Inet Access Internet Cannot connect to the connection network. The network error settings may be incorrect. Check the network settings. Status display Cert. not Valid State Description CCM The CCM certificate is certification not valid. The date not valid setting may be invalid. error Check the date setting.