Sony PXWX320 Brochure (PXWX320 Brochure) - Page 3

Features High Picture Quality The PXW-X320 incorporates three 1/2-inch-type Full-HD Exmor CMOS sensors (1920 x 1080) to achieve high resolution, high sensitivity (F11 at 59.94 Hz / F12 at 50 Hz), low noise (60 dB), and a wide dynamic range to give more freedom of expression for creative shooting. In addition to existing noise reduction features, the PXW-X320 also includes a three-dimension noise reducer. This not only detects vertical and horizontal direction in a frame picture but also noise components in a time axis, utilizing correlation characteristics between video frames. Using this feature, the S/N ratio is improved to 60 dB which is the highest level of noise reduction in a 1/2-inch-type Full-HD shoulder camcorder. Enhanced Flash Band Reducer Incorporating a newly developed algorithm, the PXW-X320 detects and processes flash banding inside its hardware before recording begins. This provides greater flexibility in reducing flash banding across different shooting environments. This feature can be disabled from the menu if you want to use Content Browser for flash band reduction after shooting. You are free to choose to reduce flash band before or after shooting, depending on each shooting circumstance. Flexible Camera System Operation The CA-FB70 Optical Fiber Camera Adaptor or the CA-TX70 Digital Triax Camera Adaptor can be attached to the PXW-X320 for live camera operation. The CA-FB70 enables the PXW-X320 to transmit signals via an optical fiber cable up to 250 m between the CA-FB70 and HXCU-FB70 Optical Fiber Camera Control Unit (CCU) with power and signal transmission. The CA-TX70 transmits signals via triax cable up to 600 m*2 between the CA-TX70 and HXCU-TX70 Digital Triax Camera Control Unit. *2 When ø 8.5 mm cable is utilized. PXW-X320 Fiber cable with Power supply CA-FB70 Up to 250 m HXCU-FB70 RCP-1000/ 1500 series 3.5-inch Type Color LCD Viewfinder With a large, easy-to-read 3.5-inch type QHD color LCD viewfinder as a standard accessory, the PXW-X320 offers outstanding resolution of 960 × 540 pixels, strongly supporting critical focus control during HD shooting. The viewfinder cover can be flipped up to enhance visibility when the camera is set on a tripod. User Customizable Menu Flash Band Reducer ON Flash Band Reducer OFF Multiple Recording Formats and Bit Rates The PXW-X320 incorporates XAVC (Intra 4:2:2 and Long 4:2:2) in the HD domain at a 100-Mbps*1 data rate, enabling the creation of rich content with 10-bit quality. This camcorder can also record Full-HD video (1920 x 1080) at up to 50 Mbps using MPEG HD422 as well as MPEG HD at 35 Mbps / 25 Mbps, MPEG IMX at 50 Mbps, and DVCAM at 25 Mbps in MXF file, as standard supported formats. *1 Available by Intra 4:2:2 Easy and Convenient Wireless Operation The PXW-X320 has a User Customizable Menu feature that is typically associated only with high-end camcorders. This feature allows you to pick and organize frequently used menu items much in the same way as the bookmark feature of a web browser. By using this feature, you can save a lot of time - you won't have to repeatedly search for specific menu items - and experience more efficient operation. Variety of Interfaces Two lines of SDI output connection are provided by the PXW-X320. This enables, for example, the director and camera operator to concurrently check shot content via two separate monitors. Also, for monitoring purposes this camcorder can be connected via HDMI to professional displays as well as domestic-use TVs with an HDMI connector. The i.LINK connector can be used for HDV when SP 1440 (FAT) mode is selected and for DV when DVCAM (FAT) mode is selected, for both input and output signal flows. The PXW-X320 is designed to support wireless operation using an optional wireless adapter, the CBK-WA101, which can be attached directly. Using this adapter, you can stream out pictures for live shooting via an IP network. After shooting, you can select a recorded proxy or high-resolution file from the Streaming list and upload it to the PWS-100RX1 or to an on-premises server or to a SDI cloud service via a mobile Wireless LAN router or 3G/4G/LTE device. The PWS-100RX1 On-premises Server 3rd Party Decoder adapter also provides live monitoring and remote control of the PXW-X320 Viewing/Controlling File Transferring by mobile tablet or smartphone with File mobile application software. Smartphone, Tablet On-premises Server Switcher NLE Cloud Services