Sony R5715X Operating Instructions - Page 9
Changing the sound settings
UPC - 027242662698
View all Sony R5715X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Receiving a station through a list - LIST You can list up the frequency or the name. For details on labeling a station, see page 10. (With the card remote commander) 1 Select the band, then press (LIST). The frequency or station appears. 2 Press M or m repeatedly until the desired station appears. 3 Press (ENTER) to receive the station. Other functions Changing the sound settings Adjusting the sound characteristics You can adjust the bass, treble, balance, fader and subwoofer volume. 1 Select a source, then press (SOUND) repeatedly to select the desired item. The item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) t SUBW (subwoofer volume)* * "ATT" is displayed at the lowest setting, and can be adjusted up to 20 steps. 2 Press the volume +/- button repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press < or ,. Adjusting the equalizer curve - EQ7 Tune You can adjust and store the equalizer settings for different tone ranges. (With the card remote commander) 1 Select a source, then press (MENU). 2 Press M or m repeatedly until "EQ7 Tune" appears, then press (ENTER). 3 Press < or , repeatedly to select the desired equalizer type, then press (ENTER). 4 Press < or , repeatedly to select the desired frequency. The frequency changes as follows: 62Hz y 157Hz y 396Hz y 1kHz y 2.5kHz y 6.3kHz y 16kHz continue to next page t 9