Sony RDP-XA700iPN Operating Instructions - Page 18
To connect wirelessly, Select [Apply].
View all Sony RDP-XA700iPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
7 Select the SSID of the wireless LAN router/access point, then input the Security Key (if applicable). For Windows 8 UI Turn on PC. Move the mouse pointer to the top-right (or bottom-right) corner on the Start screen to display the charms, and select [Settings]. With a touch panel, display the charms by swiping from the right end of the Start screen, and select [Settings]. SSID 8 Select [Apply]. 9 Disconnect the network (LAN) cable from the unit following the on-screen instructions. The unit restarts automatically, then the LINK indicator lights up green when the connection is established. To connect wirelessly Note Before starting this procedure, be aware that your Wi-Fi network will not be protected until the setting is complete. After the setting is complete, your Wi-Fi network will be protected again when you set a wireless LAN security. 1 Turn the unit on. 2 Press and hold the ALL RESET button on the rear of the unit with a thin object such as a small pin until the ?/1 indicator starts flashing. 3 Turn the unit on again. Then wait for about 70 seconds - 120 seconds until the LINK indicator turns off. 4 Connect the unit and a Mac or PC. For Mac OS X Turn on Mac. Click icon on the top of the screen. Turn on the Wi-Fi or AirPort. Then select [Open Network Preferences...]. Select [RDP-XA700iPN_Setup] from the network list. Select or tap the or icon. Select [RDP-XA700iPN_Setup] from the network list. For Windows 7/Windows 8 Turn on PC. Click icon on the bottom of the screen. Select [RDP-XA700iPN_Setup] from the network list. For Windows Vista Turn on PC. Click icon on the bottom of the screen. Click [Connect to a network]. Select [RDP-XA700iPN_Setup] from the network list. 5 Perform steps 4 to 8 above. The unit restarts automatically, then the LINK indicator lights up green when the connection is established. 6 Reconnect the Mac or PC to your network. Note This procedure needs to be completed within 10 minutes. If you cannot complete, start over from step 2. 14US