Sony RDPX50IPBLK Operating Instructions - Page 2

Operations AUDIO IN indicator MEGA BASS indicator Remote sensor Docking Tray VOLUME + (VOL + on the remote) and  buttons have a tactile dot. Before using the unit To turn on/off the power Press  (power). The  (power) button indicator will light up in green when the unit is turned on. To adjust the volume Press VOLUME +/− (VOL +/− on the remote). Tips  The volume range is adjustable between 0 and 30.  When turning on the power, the last volume setting is resumed. The volume will be suitably lowered automatically, if the last volume setting is too loud.  The  (power) button indicator flashes three times when the sound is set to either maximum or minimum volume. To reinforce the bass sound Press MEGA BASS. The MEGA BASS indicator lights up. You can achieve high quality bass sound. To return to normal sound, press the button again. Power management system After playback of the iPod (or component connected to AUDIO IN jack) has finished, if no operation is performed for about 30 minutes, the unit will automatically turn off. Playing an iPod You can enjoy audio from iPod by setting it in the Docking Tray of this unit. When setting an iPod in the unit, be sure to use the supplied universal dock adapter with your iPod or commercially available products from Apple Inc. If you are using an iPhone, iPhone 3G, iPhone 3GS or iPhone 4, attach the supplied universal dock adapter for iPhone, iPhone 3G, iPhone 3GS or iPhone 4 before connecting. The adapter number, ,  or , is shown on the underside of the supplied universal dock adapters.  is for the iPhone,  is for the iPhone 3G & iPhone 3GS and  is for the iPhone 4. Check the adapter number before use. Universal Dock Adapter    Notes  To use an iPod, refer to the user's guide of your iPod.  The connector of the unit is exclusively for use with an iPod. If you use a device that does not match the connector, connect it to the AUDIO IN jack of this unit with the supplied audio connecting cable.  Sony cannot accept responsibility in the event that data recorded on an iPod is lost or damaged when using an iPod connected to this unit.  For details of environmental conditions for operating your iPod, check the website of Apple Inc. 1 Attach the adapter for your iPod/iPhone. 2 Set your iPod/iPhone in the Docking Tray. On copyrights ­i­Phone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. "Made for iPod," and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. To use this unit as a battery charger for your iPod You can use the unit as a battery charger for your iPod. Charging begins when the iPod is connected to the unit. The charging status appears in the display of iPod. For details, see the user's guide of your iPod. Tip  Remove the case or cover from your iPod before setting it in the tray to ensure a stable connection. 3 Press  (direct power-on). The iPod begins to play back. You can operate the connected iPod by this unit or the iPod buttons. To Press Turn off the iPod Press and hold . Pause playback  To resume play, press it again. Go to the next track  (forward) Go back to the previous  (backward)*1 track Locate a point while listening to the sound  (forward) or  (backward) while playing and hold it until you find the point. Locate a point while observing the display on iPod  (forward) or  (backward) in pause and hold it until you find the point then press . Go back to the previous MENU*2 menu Select a menu item or a track for playback  (up)/ (down)*2 Execute the selected menu ENTER*2 item or begin playback *1 During playback, this operation returns to the beginning of the current track. To go back to the previous track, press twice. *2 These operations are available only when using the supplied remote commander. Notes  When placing or removing the iPod, hold the iPod at the same angle as that of the connector on this unit, and do not twist or bend the iPod as connector damage may result.  Do not carry the unit with an iPod set on the Docking Tray. Doing so may cause a malfunction.  When placing or removing the iPod, hold the Docking Tray securely.  Before disconnecting the iPod, pause playback.  If the battery of your iPod is extremely low, charge it for a while before operation.  An iPod touch/iPhone will not work unless it is turned on. Be sure to turn on the power of iPod touch/iPhone before operation. Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. 1 Connect the AUDIO IN jack on the back of the unit to the line output jack of the portable digital music player or other component firmly using an audio connecting cable. 2 Press  (power) to turn on the unit. 3 Turn the connected component on. 4 Press AUDIO IN. The AUDIO IN indicator lights up. The sound from the connected component is output from the speakers of this unit. AUDIO IN DC IN 20V To external equipment Audio connecting cable (supplied) Notes  Refer also to the connected equipment's manual.  The supplied audio connecting cable may not be usable with some external equipment. In this case, use a cord suitable for the external equipment you are using.  If the volume level is low, adjust the volume of the unit first. If the volume is still too low, adjust the volume of the connected equipment. Troubleshooting General The power is not on.  Make sure the AC power cord is connected to the wall outlet firmly. There is no audio.  Adjust VOLUME +/− (VOL +/− on the remote). Noise is heard.  Ensure that the unit is not in the vicinity of in-use portable phones, etc. The  (power) button indicator flashes.  If the unit often turns off automatically after flashing, even though the AC power cord is reconnected, consult your nearest Sony dealer. iPod There is no audio.  Make sure the iPod is connected firmly. Operation is not performed.  Make sure the iPod is connected firmly. The iPod cannot be charged.  Make sure the iPod is connected firmly. Audio in  Make sure the Audio connecting cable is connected firmly. Remote The remote does not function.  Replace the battery in the remote commander with a new one if it is weak.  Make sure that you are pointing the remote at the remote sensor on the unit.  Remove any obstacles in the path of the remote and the unit.  Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light.  Move closer to the unit when using the remote. If the problem persists, consult your nearest Sony dealer. Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohm loads both channels driven, from 150 Hz -10,000 Hz; rated 18 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion. Section for iPod DC out: 5V MAX: 500mA General Speaker Approx. 7.6 cm (3 inches) dia. 4 Ω Input AUDIO IN jack (ø 3.5 mm stereo minijack) Power output 20 W + 20 W (at 1% harmonic distortion) External power source DC IN 20V Dimensions Approx. 356.0 mm × 158.1 mm × 151.9 mm (w/h/d) (14 1/16 inches × 6 1/4 inches × 6 inches) Mass Approx. 1.8 kg (3 lb 15 oz) Supplied accessories Remote commander (1) AC power adaptor (1) AC power cord (1) Audio connecting cable (1) Universal dock adapter for iPhone (1) Universal Dock Adapter for iPhone 3G & iPhone 3GS (1) Universal Dock Adapter for iPhone 4 (1) Design and specifications are subject to change without notice. Compatible iPod/iPhone models Compatible iPod/iPhone models are as follows. Update your iPod/iPhone to use the latest software before you use it. iPhone 4 iPhone 3GS iPhone 3G iPhone iPod touch 3rd generation iPod touch 2nd generation iPod touch 1st generation iPod nano 5th generation (video camera) iPod nano 4th generation (video) iPod nano 3rd generation (video) iPod nano 2nd generation (aluminum) iPod nano 1st generation iPod classic iPod 5th generation (video) iPod 4th generation (color display) iPod 4th generation iPod mini Notes  In these Operating Instructions, "iPod" is used as a general reference to iPod functions on an iPod or iPhone, unless otherwise specified by the text or illustrations.  The connector of the unit is solely for use with an iPod. If you use devices that do not have the same connector, connect to the AUDIO IN jack of this unit with the supplied audio connecting cable.  Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using an iPod connected to this unit.