Sony RDR VX555 Quick Start Guide - Page 2
Test your, Set Top Box, controller, Examples, of Brand, Codes - manual
UPC - 027242708808
View all Sony RDR VX555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
The Easy Setup display automatically appears on your TV screen when you turn on your recorder for the first time. Follow the steps below to make the minimum number of basic adjustments to use the recorder. If you make a mistake, press RETURN. 1 Turn on your TV and any other connected equipment such as your cable box or satellite receiver. 2 Press I/1 on the VCR-DVD recorder. 3 Switch the input selector on your TV so that the signal from the recorder appears on your TV screen. Easy Setup Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup. Start 6 Press M/m to select whether or not you want to use the Set Top Box control function, then press ENTER. 7 Press the number buttons to enter the brand code of your cable box or satellite receiver. Then select "OK" and press ENTER. Some examples of brand codes are shown on the right. ENTER Enter Return SYSTEM MENU Exit If "Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup." does not appear on your TV screen, select "Easy Setup" from "Setup" in the System Menu. 4 Press ENTER. 5 Press M/m to select a language for the on-screen display, then press ENTER. Easy Setup Select the screen language. English Français Español Move ENTER Enter Return SYSTEM MENU Exit 8 Press M/m to select the cable box/satellite receiver output channel, then press ENTER. If you connected your cable box or satellite receiver to the VCR-DVD recorder's audio/ video input, select the "Line" number you connected to. 9 Press M/m to set the month and press ,. Set the day, year, hour, minutes, and AM/PM in the same way. Then press ENTER. Easy Setup Do you want to control your set top box with this recorder? (Changes to the current setting will erase all timer settings.) Yes No Move ENTER Enter Return SYSTEM MENU Exit YES NO Easy Setup Enter the brand code of your set top box. OK Move ENTER Enter Cancel Return SYSTEM MENU Exit Easy Setup Select the input line that you connected the set top box to. Line1 Line2 Move ENTER Enter Return SYSTEM MENU Exit Easy Setup 12:00 AM Set the time and date manually. Month Day 01 01 Year 2007 Mon Hour Min 12 : 00 AM/PM AM Move ENTER Enter Return SYSTEM MENU Exit Examples of Brand Codes Cable box brand Code number Sony 1006 Scientific Atlanta Motorola Pace 0008,0277,0017,00 06,0237,0025,0477, 0207,0877,0003,00 12,0000,0021,1877 0476,0276,1476,08 10,1376,1254,0400, 1106 0237 Samsung General Instruments 0040,0144,0023,00 03,0070,0000 0476,0011,0014,00 98,0810,0024,0003, 0015,0276 For brand codes other than the above, see the "Cable Box/Satellite Receiver Brand Code" list of the Operating Instructions (page 121). Number buttons / (on/standby) SYSTEM MENU 12 3 456 789 0 RETURN ENTER ///ENTER Press ENTER to make a selection 10 Press M/m to select the type of TV you have, then press ENTER. If you have a wide-screen TV, select "16:9." If you have a standard TV, select either "4:3 Letter Box"(shrink to fit) or "4:3 Pan Scan" (stretch to fit). This will determine how "widescreen" images are displayed on your TV. Easy Setup 10:10 AM Select your TV screen type. 16 : 9 4 : 3 Letter Box 4 : 3 Pan Scan Move ENTER Enter Return SYSTEM MENU Exit 11 Press / to select the type of Dolby Digital signal you want to send to your AV amplifier (receiver), then press ENTER. If your AV amplifier (receiver) has a Dolby Digital decoder, select "Dolby Digital." If not, select "D-PCM." Easy Setup Dolby Digital D-PCM Dolby Digital 10:10 AM Move ENTER Enter Return SYSTEM MENU Exit 12 Press / to select the type of DTS signal you want to send to your AV amplifier (receiver), then press ENTER. If your AV amplifier has a DTS decoder, select "On." If not, select "Off." Easy Setup DTS On Off 10:10 AM Move ENTER Enter Return SYSTEM MENU Exit 13 When "Finish" appears, press ENTER to complete Easy Setup. Easy Setup Easy Setup is finished. Finish 10:10 AM Move ENTER Enter Return SYSTEM MENU Exit Test your Set Top Box controller If you connected a Set Top Box controller, do the following: 1 Turn on the recorder and the cable box/satellite receiver. 2 Point the remote at the recorder (not at the cable box/satellite receiver). 3 Press CH+/- and confirm that the channel changes on the cable box/satellite receiver window. If the recorder does not control your cable box or satellite receiver, see "If you cannot get the recorder to control your cable box/satellite receiver" at the end of "Step 7: Easy Setup" in the Operating Instructions. Insert a DVD Disc 1 Press DVD to operate the DVD recorder. 2 Press OPEN/CLOSE and place a recordable DVD on the disc tray. 3 Press OPEN/CLOSE again to close the disc tray. Wait until "LOAD" disappears from the front panel display. See "Quick Guide to Disc Types" in the Operating Instructions for more details about the differences between disc types. Insert a VHS Tape 1 Press VIDEO to operate the VCR. 2 Insert a tape with its safety tab in place. Record a TV Program 1 Press DVD to record to a DVD disc. Or, press VIDEO to record to a VHS tape. 2 Select a channel. • When using a Set Top Box controller Press CH+/- buttons to select the cable box or satellite receiver's channel. • When not using a Set Top Box controller. Press INPUT to select input source until "LINE 1" appears in the front panel display. Then select a channel on the connected cable box or satellite receiver. 3 Press REC MODE repeatedly to select the recording mode. When recording to a DVD disc: HQ, HSP, SP, LSP, ESP, LP, EP, or SLP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive mode, but the picture quality gradually deteriorates. When recording to a VHS tape: SP or EP EP (Extended Play) provides recording time three times as long as SP (Standard Play). However, SP produces better picture and audio quality. 4 Press REC. The recorder starts recording. To stop recording, press STOP. Record a TV Program using Timer 1 Press TIMER. The Timer menu appears. Timer - Standard 10:10 AM NoN. o.0R1ec To Data Start End Source Mode Edit 01 DVD 04/15 09:00PM 10:00PM CH8 02MedDiaVD D0at4e/30 S0t9a:r1t5PM E0n9d:45PM CCHh11 03DVD--- Tod-a-/y-- 09 -:-:0-0- PM 10 -:-:0-0- PM -L--ine 1 04 Mode ---SP --- 05 06 Adjust Move Return SYSTEM MENU Exit 2 Press M/m to set Media, Date, Start and End time, Channel or Input source and Rec Mode. As for selecting "Ch(channel)", see above "Record a TV program." The way to select "Ch(channel)" may differ in the case of a Set Top Box controller. 3 Press ENTER. Leave the cable box/satellite receiver turned on and do not change its selected channel until the recorder finishes the timer recording. Label side facing up OPEN/ CLOSE DVD 12 VIDEO CH/ TRACKING 3 456 INPUT 789 ANGLE TOP MENU 0 MENU SET TIME/TEXT AUDIO SUBTITLE SYSTEM MENU DISPLAY TITLE LIST TIMER ORIGINAL/ PLAYLIST ENTER RETURN OPTIONS PREV REPLAY ADVANCE NEXT PLAY CLEAR PAUSE STOP REC SYNCHRO REC REC MODE TV VOL CH DIGITAL/ ANALOG INPUT Playback the Recorded DVD Disc 1 Press DVD to operate the DVD recorder. 2 Press TITLE LIST. The Title List menu appears. Title List(Original) 1/4 No. Title 01 LINE 1 02 LINE 1 03 LINE 1 04 LINE 1 10:10 AM Length Edit 01:29:03 > 00:31:23 > 01:59:00 > 00:58:56 > LINE 1 May/02/2007 08:00 PM Move ENTER Enter Return SYSTEM MENU Exit 3 Press / to select the title you want to play and press ENTER. The sub-menu appears. Title List (Original) 1/4 No. Title 01 LINE 1 02 LINE 1 03 LINE 1 04 LINE 1 LINE 1 May/02/2007 08:00 PM Move ENTER Enter Return 10:10 AM Length Edit P01la:2y9:03 > T00it:l3e1E:2ra3se> C01ha:5p9te:r0E0ra>se P00ro:5te8c:5t6 > Title Name A-B Erase Divide Title SYSTEM MENU Exit 4 Press / to select "Play" and press ENTER. Playback starts from the beginning of the title. Playback the Recorded VHS Tape 1 Press VIDEO to operate the VCR. 2 Press / to find the point you want to start playback. For further explanations, see "VCR Playback" in the Operating Instructions. 3 Press PLAY. Playback starts. Dub From VHS Tape to DVD 1 Insert a recordable disc. 2 Insert a source tape. 3 Cue the tape at the start point, and press < VIDEO. From DVD to VHS Tape 1 Insert a recordable tape. 2 Insert a source disc. 3 Select a title on the disc, and press DVD ,. Before dubbing, select the recording mode and make the necessary audio settings. For details, see the dubbing section in the Operating Instructions. ONE-TOUCH DUBBING VIDEO DVD