Sony RM-NU1 Operating Instructions - Page 71
Updating the Firmware, Updating the system application
View all Sony RM-NU1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Updating the Firmware Additional information Updating the system application By downloading the latest version of the system application, you can take advantage of the newest functions. The unit accesses the Sony server to update the system. When a new update is available, you will be notified by a message that appears on the screen while the unit is on and connected to the Internet. Note Make sure you do not attempt any of the following operations while the update is in progress. - Turn the unit off - Disconnect the network cable - Remove the unit from the remote control charger 5 Tap "OK." 6 Follow the on screen instructions. 1 Place the unit on the remote control charger. 2 Press HOME on the unit. The HOME screen appears. 3 Tap " Settings." 4 Tap "System Update." One of the following messages appears on the screen. "Found the latest software. Update?" : Proceed to step 5. "The software is up to date. It does not need to be updated." : A firmware update is not needed. Tap "Close" to exit this screen. The unit starts to update the system application. It may take a while (about 20 minutes at the longest) for the unit to finish the update. The required time will depend on the amount of data in the updates, the line type of the network, the network communication environment, etc. When the system update finishes, the unit restarts automatically. Notes • Do not remove the unit from the remote control charger until the update has been completed. • Reboot the unit once or twice after the update. To cancel the procedure Select "Cancel" in step 5. 71GB